Disengaging The System; Overriding The System; Changing The Set Speed - Ford 2015 EDGE Owner's Manual

E164805
Adaptive cruise control gap settings
Set speed Graphic display,
mph ( km/h)
62 (100)
62 (100)
62 (100)
62 (100)
Each time you start the vehicle, the system
selects the last chosen gap.

Disengaging the System

Press the brake pedal or press and release
the CNCL button. The last set speed does
not erase.

Overriding the System

WARNING
Whenever the driver is overriding the
system by pressing the accelerator
pedal, the system does not
automatically apply the brakes to maintain
separation from any vehicle ahead.
You can override the set speed and gap by
pressing the accelerator pedal.
Edge/Galaxy/S-MAX (CDQ), enUSA, First Printing
Cruise Control
bars indicated
between
vehicles
1
2
3
4
The selected gap appears in the
information display as shown by the bars
in the graphic. Five gap settings are
available.
The gap setting is time dependent and the
distance automatically adjusts with your
vehicle speed.
Time gap,
seconds
yd (m)
1 31 (28)
1.4 43 (39)
1.8 55 (50)
2.2 67 (61)
When you override the system,
the green indicator light
illuminates and the lead vehicle
E144529
graphic does not show in the
information display.
The system resumes operation when you
release the accelerator pedal. The vehicle
speed decreases to the set speed, or a
lower speed if following a slower vehicle.

Changing the Set Speed

• Accelerate or brake to the desired
speed, then press and release SET+.
• Press and hold SET+ or SET- until the
desired set speed shows on the
information display. The vehicle speed
will gradually change to the selected
speed.
• Press and release SET+ or SET-. The
set speed changes in 1 mph (1 km/h)
increments.
199
Gap Dynamic beha-
vior
Sport
Normal
Normal
Comfort