Table of Contents
Advertisement
Assembly Instructions
1. Attach the signal cable to the pedestal.
2. Put the stand pipe into the pedestal.
3. Use the 6 M8x25 screws and the gaskets to fix the stand
pipe to the pedestal at the bottom of the machine.
4. Place the armrest onto the stand pipe.
5. Next, fix it with the 4 M6x20 screws and the gaskets.
YOUR MACHINE IS NOW READY!
Advertisement
Table of Contents
Need help?
Do you have a question about the V1008S and is the answer not in the manual?
Questions and answers