Section 2 Connecting To The Internet; Identify Your Internet Set Up; Getting Your Netgenie Ready - Cyberoam NetGenie Soho Quick Start Manual

Section 2 Connecting to the Internet

Identify your Internet Set up

Depending on your network set-up, you can connect NetGenie to the Internet by referring to any of the
following scenarios:
Phone Line → ADSL/Cable
Modem → PC / Laptop:
Refer to Scenario 1
Internet
ADSL/Cable Modem
Modem
Power
Cable
Phone Line → ADSL/Cable
Modem also acts Wi-Fi access point
→ PC / Laptop: Refer to Scenario 1
Internet
ADSL/Cable Modem
+ Wireless Router
Modem
Power
Cable

Getting your NetGenie Ready

Before you begin surfing the Internet using NetGenie, you need to assemble the appliance.
1. Look out for a sticker at the back of the appliance containing the
default wireless network name, technically known as SSID and
a pass key specific for your appliance. Please note down your
pass key for future reference.
2. Plug one end of the power adapter into the socket on the back of
NetGenie Base Unit and the other end into the nearest main
socket.
3. Before you access the Internet through NetGenie, make sure
the power is switched on. The Power LED on the front panel
should turn green.
Desktop
Direct Cable → PC / Laptop:
Refer to Scenario 2
Desktop
Laptop
Phone Line → ADSL/Cable Modem → Wi-Fi access point
→ PC / Laptop: Refer to Scenario 1
Internet
Modem
ADSL/Cable
Power
Modem
Cable
Internet
Desktop
3 1
Wi-Fi Router
Power
Cable
USB Modem:
Refer to Scenario 3
Internet
Desktop
Model Name : Cyberoam NetGenie NG12AO
Serial Number : W118300302-Q26QRB MAC : 00:0E:F4:E3:04:25
Wireless Network Connection Name (SSID) : NetGenie-1C3D
Network Security Key (Pass Key) : MCAU7I8X
2 1
1. Wireless Network Name
2. Security/Pass Key
Desktop
Laptop
CE
Manufactured in China