Subwoofer Placement; Speaker Connections - Phase Technology PC0.5 Owners Manual/Install Manual

[SUBWOOFER PLACEMENT]

Subwoofer placement is less critical, because the frequencies they reproduce are omni directional. This means the human ear doesn't
perceive these low frequencies as coming from a specific direction, enabling placement of a subwoofer virtually anywhere in the listening
room.
It's best, however, to keep a subwoofer within the sound field of the other speakers. The closer the subwoofer is to a wall, the louder and more
intense its bass output will be: this effect is even stronger when the sub is placed in or near a room's corner. If using two subwoofers, start
by placing them next to the front left and right speakers, in both front corners or one in the corner and one 1/3 of the way along the front wall
from the corner. Each room is different. Experiment with these options or try other locations until you get the best results. If you must choose a
less-than-ideal position, the output level of Phase Technology powered subwoofers is adjustable to compensate for your listening environment.

[SPEAKER CONNECTIONS]

The following instructions apply whether you are using a separate amplifier or Home Theater receiver. For simplicity we will use the term
"amplifier" throughout this manual to mean both.
FRONT SPEAKERS:
The pair of front speaker connections (left and right) on your amplifier will be labeled "Front" or "Main." Connect the
speaker cables for your left and right front speakers using these terminals and then connect the cables to the front satellites. Observe positive
and negative polarities.
PC9.5 BI-WIRING:
The PC9.5 speaker is equipped with bi-wiring, with four speaker terminals instead of two. This may enhance speaker
performance by using an additional pair of speaker cables. In order to bi-wire this speaker, remove the gold-plated strips between the speaker
terminals and connect two cables between your amplifier's positive output terminal and the two positive (red) terminals on the speaker. Then
connect the other two cables between the amp's negative output terminal and the two negative (black) terminals on the speakers. If you
choose not to bi-wire your speakers, do not remove the metal strips between the speaker terminals. Connect each cable in the standard
manner, with one cable each between the positive and negative speaker terminals and your amplifier.
CENTER SPEAKER:
The center speaker connections on your amplifier will be labeled "Center" or "Center Channel." Connect the speaker
cables for your center channel speaker using these terminals and then connect the cables to the center speaker. Observe positive and
negative polarities.
SURROUND SPEAKERS:
speaker cables for your left and right surround speakers using these terminals and then connect the cables to surround satellite speakers.
Observe positive and negative polarities.
Please refer to the diagram on the page 7 for speaker connections.
Special note: Turn off and unplug your amplifier before connecting speakers.
Special Note: Observe Speaker Polarity Carefully!
Every cable, speaker and amplifier is clearly marked to show their positive (+) and negative (-) terminals.
Amps and speakers may use some combination of these symbols and/or colors to indicate positive
(usually red) and negative (usually black or white) connections. One strand of your cable will also be
ridged and/or marked with a colored line or other indicator on the positive side. For proper polarity and,
thus, ideal system performance, always connect the positive side of the cable to the positive terminals
on your speakers and amplifier and the negative side of the cable to the negative terminals.
The pair of surround connections (left and right) on your amplifier will be labeled "Surround." Connect the
Premier Collection Surround speakers are marked with arrows indicating "left" or "right" to
denote how the speaker should point into the listening area. Make sure you are connecting the
proper speaker to the proper set of wires before mounting.
6