Canon PowerShot SX120 IS Owner's Manual page 12

etting the Date and Time
The DatelTime settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Turn on the camera.
Press the power button.
The DatelTime screen will appear.
Set the date and time.
Press the
~ ~
buttons to choose an
option.
Press the
A T
buttons or turn the
0
dial
to set a value.
Make the setting.
Press the
@
button.
Once the date and time have been set,
the DatelTime screen will close.
Pressing the power button will turn off the
camera.
Reappearing DatelTime screen
Set the correct date and time. If you have not set the date and time, the Date/
Time screen
will
appear each time you turn on the camera.
12