Frontal Panel Operations; Diagram Of Frontal Panel; Button Instructions (Operation Mode) - Eager LED LVP603S User Manual

LVP603S User's Manual
III. Frontal panel operations

1. Diagram of frontal panel

2. Button instructions (operation mode):

There are 16 buttons on the frontal panel of LVP603S, all these
buttons will be operable after start. they have the following functions as
described below:
1) Select input video source
Port name
V1~V2
VGA
DP(Display Port)
DVI
HDMI
SDI/HDSDI (IN)
Switch audio input while operating above buttons; select the audio
signal input from corresponding video input to output it through Audio
OUT.
Notes: when user has selected input signal, the current input
signal source that you selected, e.g.: INPUT=HDMI will appear in the
LCD. In the meantime, the indicator above the corresponding button
will indicate the status of current input signal source. If there is no valid
signal input, the indicator will blink and dark screen appears; if the
signal is valid, the indicator will illuminate.
2) VGA input auto adjustment (Auto)
When the current VGA input source of LVP603S is a valid
signal, press this button, LVP603S will automatically adjust the
sampling parameters of the VGA signals, so as to make VGA
---------------------------------------------------------------------------------------------------
Figure 2
Description
2-channel PAL/NTSC composite video input
1-channel computer analog signal input
1-channel DisplayPort digital HD signal input
1-channel computer digital signal input
1-channel HDMI digital HD signal input
1-channel digital video signal input ( SD/HD)
LED VIDEO PROCESSOR
6