1. Manuals
  2. Brands
  3. Eager LED Manuals
  4. Receiver
  5. LVP603S
  6. User manual

Eager LED LVP603S User Manual

Led video processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SHENZHEN EAGER LED CO., LTD.
LED Display Factory
Web:www.eagerled.com
LVP603S
LED Video Processor
USER'S MANUAL
Outdoor LED
Screen,
Indoor LED
Screen,
Outdoor LED
Module,
Indoor LED Module,
LED Control
System,
Commercial LED
Screen,
Rental LED
Screen,
Curved LED Screen

Advertisement

Table of Contents
loading

Summary of Contents for Eager LED LVP603S

  • Page 1 SHENZHEN EAGER LED CO., LTD. LED Display Factory Web:www.eagerled.com LVP603S LED Video Processor USER’S MANUAL Outdoor LED Screen, Indoor LED Screen, Outdoor LED Module, Indoor LED Module, LED Control System, Commercial LED Screen, Rental LED Screen, Curved LED Screen...

  • Page 2: Table Of Contents

    III. Frontal panel operations 1. Diagram of frontal panel 2. Button instructions (operation mode) IV. Setup 1. Enter setup of LVP603S 2. Select language 3. Output image setup 4. Brightness / color / definition 5. PIP / POP output image setup 6.

  • Page 3: Safety Precautions

    LVP603S User’s Manual I. Safety Precautions Danger! There is high voltage in the processor, to prevent any unexpected hazard, unless you are maintenance, please do not open the cover of the device. Warning! 1. This device shall not encounter water sprinkle or splash, please do not place anything containing water on this device.

  • Page 4: Connections Of Hardware

    1-channel digital video signal input ( SD/HD) 2） Audio Input LVP603S supports 5-channel stereo audio switch. Of which, 3 channels are DP, HDMI and SDI audios, the other 2 channels are AD1, AD2 external input audio. AD1 and AD2 can be mapped to the any one of all video inputs, and will be switched synchronous to the selection of video input signals.

  • Page 5: Connection Diagram

    LVP603S User’s Manual DVI OUT 2 be connected with external LED transmission card or LED transmission box SDI/HD SDI 1-channel digital video signal loop output (0UT) 4） Audio Output (AUDIO OUT) Corresponds to the selected video input signal, output this channel audio input signals.

  • Page 6: Frontal Panel Operations

    1. Diagram of frontal panel Figure 2 2. Button instructions (operation mode): There are 16 buttons on the frontal panel of LVP603S, all these buttons will be operable after start. they have the following functions as described below: 1) Select input video source...
  • Page 7 This button can be operated to display the following two status information: Current settings of LVP603S: press “Info” button to display current settings and information of LVP603S. There are total 29 items of information. Press “Info” button again before the information disappears in LCD, the next entry of information will appear in LCD.
  • Page 8 6) PIP / POP PIP mode of LVP603S allows user to insert a PIP window in current picture, and the size and location of the PIP window can be changed freely. The signals to be displayed in PIP window can either be signals coming from other groups or be current signal itself.
  • Page 9 =DVI” appears in LCD. User can shift PIP and POP modes by pressing POP button. 7) Text Overlay mode(Text) LVP603S can add caption, company logo or animation onto current picture, while current picture is normally displayed, press Text button to go to caption adding mode, then select the signal source of caption.

  • Page 10: Setup

    For ordinary users, unless they have received adequate relevant training, they shall not attempt the following setup operations! There are 29 items in 6 categories available for you to set in LVP603S. Technicians can set these items as necessary, for details see the table below:...

  • Page 11: Enter Setup Of Lvp603S

    1. Enter Setup of LVP603S Press “Setup” for consecutive 8 times while in operation mode, “Password: 8 Enter Setup …” will appear in LCD, LVP603S will enter the No.1 setup item. After LVP603S enters the setup mode, the 7 buttons on frontal...

  • Page 12: Output Image Setup

    However, the resolution of LED screen is not exactly 1024 × 768 pixels. When the resolution of LED screen is less than 1024 × 768 pixels, we can set LVP603S to output the images exactly fitting the resolution of LED screen, so that the LED could display a full frame of image.

  • Page 13: Brightness / Color / Definition

    Vert_Str Vert_Height Vert_Height The start coordinates (0, 0) of LVP603S output image is defined in the left top of 1024×768 pixels output area. Set the four setup items as listed in above table as per the size of current LED screen (pixels) and start position of the input image that LED displays.

  • Page 14: Pip/Pop Output Image Setup

    64! Item 8: “Color” For V1, V2, DP and HDMI video input source, LVP603S can set color saturation for them ranging from 22 to 38. The lower this value is, the weaker the color looks; the higher this value is, the stronger the color looks.
  • Page 15 LVP603S Out Format = 1920 Item 13: ” PIP_Frame” User can set frame mode in PIP image window of LVP603S. There are 4 setting options, i.e.: “No frame”, “black 2 line”, “white 2 line” and “blue 2 line”. Item 14: ”POP_Height”...

  • Page 16: Text Overlay Setup

    Item 16: ” Text_Thd_RGB” LVP603S users can set R, G, B values of caption threshold value by themselves, the three values can be set to be the same within 0~252. ---------------------------------------------------------------------------------------------------...

  • Page 17: Input Image Setup

    LVP603S supports multiple machines to work together in parallel, in such mode, a number of small LED screen make up a large screen. If the output format of LVP603S is: 1920×1080, when 2 sets of LVP603S are connected in parallel, they can connect any LED screen of no higher than 3840×1080 pixels.
  • Page 18 Hori_Width = 1728 Vert_Height = 960 Then we should set the input images of each set of LVP603S. As shown in figure below, to show a complete large picture, each set of LVP603S shall capture the corresponding part of input images.
  • Page 19 This item has four values for your choice, i.e.: 100%, 1/2，1/3 and 1/4. 100% means that 100% images in horizontal direction are input; 1/N (N=2, 3, 4) means only 1/N images are input. If 3 sets of LVP603S are connected in parallel in horizontal direction, each set of LVP603S will capture 1/3 of input image.

  • Page 20: Audio Configurations

    LVP603S User’s Manual LVP603S will capture. As shown in Figure 5, the the vertical start point of the four sets of LVP603S are set as below respectively: 1# LVP603S Vert_In_Str = 0 2# LVP603S Vert_In_Str = 0 3# LVP603S Vert_In_Str = 540 4# LVP603S Vert_In_Str = 540 8.

  • Page 21: Factory District Setup

    After inputting the analog signal to the video processor who’s ADC has not been revised, the picture on the display may appear some bad phenomena, such as color cast, extreme-darkness. LVP603S can overcome all of problems by automatically revising white balance in terms of the input analog signals (AV, and VGA).

  • Page 22: Specifications

    LVP603S User’s Manual V. Specifications Inputs Nums/Type 2×Composite video 1×DP(DisplayPort) 1×VGA (RGBHV) 1×DVI 1×HDMI 1×SDI (HDSDI) Video system PAL/NTSC Composite Video 1V (p_p) / 75Ω Scope/Impedance VGA Format PC (VESA) ≤1600x1200 @60HZ VGA Scope/Impedance R, G, B = 0.7 V (p_p) / 75Ω...

  • Page 23: Notes To Model

    155 mm (high) ×350mm (wide) × 485mm (length) Weight 5.6 Kg VI. Notes to model LVP603S: with SDI / HDSDI input interface. LVP603: without SDI / HDSDI input and interface. So all instructions regarding SDI, HDSDI in above don’t apply to this model. ---------------------------------------------------------------------------------------------------...

Table of Contents