Table of Contents
Advertisement
Quick Links
DACOR
DACOR Service Training
The installation of this product includes an on-site handle. Installation is not required and door reversing does not
require drilling. The leveling legs are factory-installed and need only to be adjusted on-site.
The wood fronts on the wire racks can be stained to match the cabinetry. Please read the installation instructions for all
pertinent installation information.
The nomenclature tag is located on the interior ceiling of the unit. The Mini Manual is taped to the right front corner of
the unit behind the toekick.
Training Bulletin
New Model Introduction
Wine Chiller EWC240
Beverage Center EBC240
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dacor EWC240
Summary of Contents for Dacor EWC240
- Page 1 DACOR New Model Introduction DACOR Service Training Wine Chiller EWC240 Beverage Center EBC240 The installation of this product includes an on-site handle. Installation is not required and door reversing does not require drilling. The leveling legs are factory-installed and need only to be adjusted on-site.
-
Page 2: Temperature Control
Factory-Installed Handle and Leveling Legs only be seen when the door is open. The door handle and the leveling legs on the Dacor Wine Chiller and Beverage Center are installed during the production of the units. On-site installation is not required for these parts. -
Page 3: Control Panel
When reinstalling, note the longer screws hold the Door Reversibility retaining clip while the shorter screws secure the The door swing of these units can be reversed. The control panel. door swing should be changed before installation. Refer to the Installation Instructions for further Evaporator information on the procedure. - Page 4 Wiring and Schematic...
Need help?
Do you have a question about the EWC240 and is the answer not in the manual?
Questions and answers