Page 1
DACOR New Model Introduction DACOR Service Training Wine Chiller EWC240 Beverage Center EBC240 The installation of this product includes an on-site handle. Installation is not required and door reversing does not require drilling. The leveling legs are factory-installed and need only to be adjusted on-site.
Factory-Installed Handle and Leveling Legs only be seen when the door is open. The door handle and the leveling legs on the Dacor Wine Chiller and Beverage Center are installed during the production of the units. On-site installation is not required for these parts.
When reinstalling, note the longer screws hold the Door Reversibility retaining clip while the shorter screws secure the The door swing of these units can be reversed. The control panel. door swing should be changed before installation. Refer to the Installation Instructions for further Evaporator information on the procedure.