sunjoe SPX3001 Operator's Manual page 7

Fig. 4
Suction tube with filter
5. To assemble the spray wand protector, first snap the tabs
into the slots located at the bottom left side of the unit,
and then secure it in place with the other screw (Fig. 5).
Fig. 5
Screw
6. Fit the spray wand into the trigger gun and rotate it until
the two parts are completely locked (Fig. 6).
Fig. 6
Spray wand
Spray wand protector
Trigger gun
7. Connect the high-pressure hose to the trigger gun
(Fig. 7).
Fig. 7
High-pressure hose
m
WARNING!
Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
8. Connect the garden hose adaptor (female coupler) to
the water inlet of the pressure washer, then thread your
garden hose (male end) into the garden hose adaptor
(Fig. 8). The garden hose must have an internal diameter
of at least 13 mm (1/2 in.) and must be reinforced. The
water supply must be at least equal to the washer delivery
capacity.
NOTE: The machine is not suitable for connection to a
potable water main.
Garden hose
This end to the
(male end)
water inlet on
the unit
Fig. 8
Garden hose
7
Trigger gun
Water inlet
(female coupler)