Appendix; Technical Data - Devolo MicroLink 56k Fun II User Manual

|
12

Appendix

3 Appendix
3.1

Technical data

This table has detailed information on the MicroLink 56k Fun II for those
interested.
Power supply
Power consumption
(about)
Dimensions
Environment
Transmission rates and
protocols
Error correction
Data compression
Command set
Voice mode
Fax mode
Dialing method
Outside line
Bit-rat adaption
Computer interface
CE conformity
CE conformity
This product meets the requirements of the 1999/5/EG Directive R&TTE and
is designed for connection to public telecommunications networks in the EU
and Switzerland.
|
devolo MicroLink 56k Fun II
MicroLink 56k Fun II
230-V/9V
AC
Transmission phase (online)400 mA typ.
Command phase (offline)300 mA typ.
40 x 90 x 113 mm (height x width x depth), plastic housing
5..40°C, humidity 0..80%, non condensing
Receive: 56.000–300 bps, asynchronous;
Send: 33.600–300 bps, asynchronous
(V.92, V.90, V.34, V.32bis, V.32, V.22bis, V.22, V.21, V.23)
V.42
V.42bis
With V.92: V.42bis and V.44
AT command set according to V.250/V.25ter
Voice command set V.253
14.400–2400 bps according to V.17, V.29 and V.27ter;
Fax command set class 1 (TIA/EIA-578) and class 1.0 (T.31)
Multifrequency dial
Via flash key or digit
Automatic according to V.8
V.24/RS-232 (max. 230.400 bps including automatic detection)
Tested under EN 50022, Class B; EN 55024, EN 60950;
technical requirements in accordance with R&TTE for all Euro-
pean countries and Switzerland
|
plug