Table of Contents
Advertisement
Industrial PCs OPC7008
1.7 S
TANDARDS
This device complies with the requirements and protective aims of the following EC
regulations:
•
•
•
•
Note:
A respective conformity declaration for the authority in charge is available at the
manufacturer and may be viewed on request.
All connected components, as well as cable connections must also meet these
requirements for compliance with the EMC legislation. For this reason, screened bus and
LAN cables including screened connectors must be used and installed according to the
instructions in this user manual.
Pos : 9 /D atentechni k/Allgemei ne Hinweis e/Auss tattungs varianten/Auss tattungs varianten für OPC6000/7000 @ 2\mod_1265643750549_6.doc @ 7192 @
1.8 E
QUIPMENT VERSION
The system is available in the following equipment version:
Platform including a Flash SSD:
Platform without any rotating mass storage medium (hard disc, etc.) and with an
embedded operating system (Windows CE 6.0 / XP embedded) for stationary use with a
standard Ethernet or with radio networking cards installed on moving commissioning /
forklift equipment.
Pos : 10 /D atentec hni k/Allgemeine Hi nweise/Li eferumfang/Li eferumfang für OPC7008 / 7013 / 7015 / 7022 @ 2\mod_1257320771863_6.doc @ 6773 @
1.9 S
COPE OF DELIVERY
Please check that all of the following components are contained in the packaging:
•
•
•
Optional delivery scope
•
Pos : 11 /D atentec hni k/Betri ebs hi nweis e/Betriebsort/Betri ebs ort für OPC- Seri e / IPC- Serie / C PC- Serie / PLC- Seri e / ITC-Serie / OTC-Serie @ 0\mod_1158827335567_6.doc @ 217 @
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
This device meets the test requirements for granting the CE sign according to the
European test standards EN 61000-6-4 and EN 61000-6-2.
This device complies with the test requirements in accordance with EN 60950
(VDE0805, IEC950) "Safety of Information Technology Equipment"
The device meets the EN 60068-2-6 standard test requirements (sinus excitation).
The device meets the EN 60068-2-27 standard test requirements (shock resistance
test).
1 x device
With 24V DC devices: 3-pin lead-through plug from Phoenix Contact, 3-pin 3.81
Service CD
Operating system
OPC7 with a screw connection (already connected with
device socket)
9
Advertisement
Table of Contents
