Table of Contents
Advertisement
6.6 S
COM
ERIAL
The serial interface is also used for digital data transmission. The RS232 interface can be
connected by using a commercially available 9-pin SUB-D cable.
PIN NUMBER
Note:
This interface is not electrically isolated.
Pos : 32 /D atentec hni k/Laufwer ke/Exter ne Laufwerke/Exter ne Laufwer ke für OPC 5112 / 5115 / 5117 / IPC 1100 / CPC / PLC / OTC / ITC / VMT-Serie @ 0\mod_1158926656205_6.doc @ 563 @
6.7 E
XTERNAL DRIVES
By default, no drive for removable media (CD/floppy disk) is integrated in the device.
Instead, the system provides a USB interface, to which an external drive can be connected.
In this case you'd have to ensure that the used device is suitable for industrial
environments.
Warning:
Connecting or disconnecting external drives during operation is not admissible, since it
cannot be excluded that the drive might be in use while connecting or disconnecting it.
Data loss might result in the event of non-compliance!
Pos : 33 /D atentec hni k/Laufwer ke/Festpl atte / C ompac t Flash/Fes tpl atte C ompac t Fl ash für OPC 7008 @ 2\mod_1271079993282_6.doc @ 7615 @
24
(RS232)
INTERFACE
SIGNAL NAME
1
2
3
4
5
6
7
8
9
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
RI
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
Industrial PCs OPC7008
Advertisement
Table of Contents
