Table of Contents
Advertisement
Quick Links
Congratulations on purchasing the Molten Voltage™ Master Control MV-58
Master Control MV-58 is a programmable MIDI pedalboard controller that stores the tempo
associated with 128 programs, and transmits MIDI Clock to synchronize your MIDI-enabled effects.
Key Features
•
Fully functional stand-alone Master Controller for MIDI-controlled PedalBoards
•
Rock Solid MIDI Clock Generator
•
Call up presets on your MIDI-enabled effects
•
Solid, Professional-Grade construction, including
Riveted Steel MIDI Jack
•
Large vivid LED display -- very easy to read
•
Programmable pedalboard tempo control to
synchronize your effects
•
Versatile tempo control, including precision tap
tempo
•
MIDI Program Change and MIDI Start, Stop, and Clock output
•
Robust, 128 program storage
•
Causes other compatible Molten Voltage devices to self-program
•
Simple, intuitive user interface
questions@MoltenVoltage.com
OWNER'S MANUAL
© 2015 - MoltenVoltage.com - All Rights Reserved.
v 1.09
Advertisement
Table of Contents
Related Manuals for MoltenVoltage Master Control MV-58
Summary of Contents for MoltenVoltage Master Control MV-58
- Page 1 OWNER’S MANUAL Congratulations on purchasing the Molten Voltage™ Master Control MV-58 Master Control MV-58 is a programmable MIDI pedalboard controller that stores the tempo associated with 128 programs, and transmits MIDI Clock to synchronize your MIDI-enabled effects. Key Features •...
- Page 2 Each time the clock is started or stopped, a corresponding MIDI Start or MIDI Stop command is sent. The Tempo will be reset and synchronized each time the clock is started. Note: MIDI Start, Stop, and Clock are not channel-specific questions@MoltenVoltage.com © 2015 - MoltenVoltage.com - All Rights Reserved. v 1.09...
- Page 3 Note: After the UP or DOWN Buttons are pressed or the SELECT Knob is turned, additional taps have no effect. Maximum tap interval = 2.5 seconds (24 bpm) Minimum tap interval = 0.25 seconds (240 bpm) questions@MoltenVoltage.com © 2015 - MoltenVoltage.com - All Rights Reserved. v 1.09...
-
Page 4: Program Storage
Note: MIDI Clock output will stop while Molten Voltage self-program data is sent. As such, it will usually be necessary to restart drum machines, sequencers, etc. after storing a tempo. questions@MoltenVoltage.com © 2015 - MoltenVoltage.com - All Rights Reserved. v 1.09... - Page 5 Turning the SELECT Knob will cause the program number to increase or decrease. When a new program number has been selected, the Display will flash until the START Button has been pressed and the selected program is engaged. questions@MoltenVoltage.com © 2015 - MoltenVoltage.com - All Rights Reserved. v 1.09...
-
Page 6: Program Number
If the Display is flashing a program number, a new Program has been selected but not engaged. Once the new Program is engaged by pressing the START Button, the Display will stop flashing. questions@MoltenVoltage.com © 2015 - MoltenVoltage.com - All Rights Reserved. v 1.09... -
Page 7: Programming Information
Channel 16 is reached) Once the desired MIDI Channel is reached, press and release the DOWN Button again. The unit will re-start with the new MIDI Channel stored in memory. questions@MoltenVoltage.com © 2015 - MoltenVoltage.com - All Rights Reserved. v 1.09... - Page 8 (send No). Switch modes by pressing the Up button. Lock in your selection by pressing the Down button. Factory Preset Values Programs 1-64 are 120 bpm Programs 65-128 are "oLd" MIDI Channel 15 questions@MoltenVoltage.com © 2015 - MoltenVoltage.com - All Rights Reserved. v 1.09...
-
Page 9: Related Products
Note that versions 1.06 and older (manufactured before 10/15/14) also send Song Select data at the same time and same value as the Program Change value. O = YES, X = NO questions@MoltenVoltage.com © 2015 - MoltenVoltage.com - All Rights Reserved. v 1.09... -
Page 10: Troubleshooting
MIDI repeater. If you are daisy chaining MIDI devices, the total MIDI cable length must be considered if any MIDI devices do not amplify the data signal. questions@MoltenVoltage.com © 2015 - MoltenVoltage.com - All Rights Reserved. v 1.09... - Page 11 Molten Voltage intellectual property rights. MASTER CONTROL, NODE, SIMI, MIDI SPLITTY, TEMPODE, CTL-SYNC, CV-SYNC, Molten Voltage, and Visionary Effects, are all trademarks of Molten Voltage. Legal@MoltenVoltage.com questions@MoltenVoltage.com © 2015 - MoltenVoltage.com - All Rights Reserved. v 1.09...
Need help?
Do you have a question about the Master Control MV-58 and is the answer not in the manual?
Questions and answers