Connections; Examples Of Connections With Other Equipment - Tascam US-16x08 Reference Manual

Examples of connections with other equipment

Vocal mics
CAUTION
• Before making connections, turn this unit and all equipment to be connected off (standby).
• The phantom power switches change the settings for groups of 4 channels. Do not set phantom power to +48V when an unbalanced
dynamic mic is connected.
• Do not connect or disconnect mics while phantom power is set to +48V. Doing so could cause a loud noise and might damage this
unit and connected equipment.
• Set the LINE OUT and PHONES knobs to their minimum values before switching the phantom power setting between +48V and OFF.
Sudden loud noises from monitoring equipment could occur, and this could damage the equipment or harm hearing.
• Supplying phantom power to some ribbon mics will break them. If you are unsure, do not supply phantom power to a ribbon mic.
Drums
Keyboard
USB
Drum machine
Computer
5 – Connections
Guitar
Bass Guitar
Headphones
Sound module
Powered speakers or
amplifier and speakers
TASCAM US-16x08
11