1. Manuals
  2. Brands
  3. Ada Manuals
  4. Recording Equipment
  5. 64i
  6. Owner's manual

Ada 64i Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

64i – 1.28i – 2.56i
DIGITAL DELAYS
OWNER'S MANUAL
th
Originally written by ADA SIGNAL PROCESSORS, INC. Scanned and edited by Jur at 1
of may 2004. Original
ADA logo edited and rendered by Barend Onneweer of Raamw3rk.) The version of this manual is copyrighted and
may not be sold or placed on a website without permission of the editor.
Release No.1 for
http://www.adadepot.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 64i and is the answer not in the manual?

Questions and answers

Related Manuals for Ada 64i

Summary of Contents for Ada 64i

  • Page 1 Originally written by ADA SIGNAL PROCESSORS, INC. Scanned and edited by Jur at 1 of may 2004. Original ADA logo edited and rendered by Barend Onneweer of Raamw3rk.) The version of this manual is copyrighted and may not be sold or placed on a website without permission of the editor.

  • Page 2: Table Of Contents

    ADA 64i-1.28i-2.56i owners manual Contents 1.0 INTRODUCTION 1.1 FEATURES 1.2 PRECAUTIONS 2.0 CONTROL FUNCTIONS 2.1 REAR PANEL 3.0 INITIAL SET-UP 3.1 INPUT/OUTPUT ADJUSTMENT 3.2 REMOTE FUNCTIONS 3.3 REGENERATION SECTION 3.4 PHASE 3.5 REPEAT HOLD 3.6 DELAY SECTION 3.7 MODULATION 4.0 PATCH DIAGRAMS...

  • Page 3: Introduction

    ADA 64i-1.28i-2.56i owners manual 1.0 INTRODUCTION Thank you for purchasing one of our professional ADA DIGITAL DELAYS, The .64i, 1,28i, and 2.56i combine the latest in digital technology with innovative, yet cost effective designs. They fulfill your long delay and special effects processing needs with fuli bandwidth at all delay settings, more useful features, and better sound quality than anything else in their respective classes.

  • Page 4: Rear Panel

    "OFF" position. Also set your amplifier's power switch to the "OFF" position. (B) Connect your DIGITAL DELAY'S AC CORD to a grounded outlet. (C) Set the front panel controls as shown above (Figure 3-1). ,64i and 2.56i owner's should use the longest delay factor pushbutton, 640rns and 2560ms respectively.

  • Page 5: Input/Output Adjustment

    Room ambience or naturally reflected sounds are quite different from the original signal because reflective surfaces of a room absorb high frequencies more quickly than low frequencies. ADA DIGITALS can simulate room acoustics by rolling-off the higher frequencies with the continuously variable REGENERATION HI-CUT control. At minimum cut (16kHz), the delayed signal is not altered.

  • Page 6: Phase

    ADA 64i-1.28i-2.56i owners manual regenerated signal content above the mid-range frequencies is attenuated to simulate highly damped room acoustics. The frequency spectrum of the sound source generally decays as it would in a natural environment. 3.4 PHASE The delayed signal's phase is inverted when the PHASE pushbutton is engaged. "Inverted phase"...

  • Page 7: Modulation

    4.0 PATCH DIAGRAMS IMPORTANT NOTICE: .64i OWNERS SHOULD USE DIAGRAMS OF 2.561 TO SET FRONT PANEL CONTROLS, AS THE FIRST FIVE DELAY PUSHBUTTONS ON THE 2.561 ARE IDENTICAL TO THE THOSE ON THE .64 FIGURE 4-1 / CLASSIC FLANGE This demonstrates the full 8:1 sweep range of your digital delay.

  • Page 8: Thick Chorus

    ADA 64i-1.28i-2.56i owners manual FIGURE 4-3 / THICK CHORUS This is a dramatic, very deep chorus. Adjust the SPEED control for the desired effect. FIGURE 4-4 / STEREO DOUBLING The OUTPUT MIX control is set at full delay (10) for double tracking when using the DIRECT OUTPUT and the EFFECT OUTPUT in a stereo PA or recording system.

  • Page 9: Repeat Hold

    ADA 64i-1.28i-2.56i owners manual FIGURE 4-6 /REPEAT HOLD This captures, stores, and repeats a segment of sound without signal degradation. The pitch and repeat rate may be modified by using the DELAY MULTIPLIER control. Many useful special effects can be produced by varying the MODULATION DEPTH and SPEED controls.

  • Page 10: Blank Patch Sheets

    ADA 64i-1.28i-2.56i owners manual 4.1 BLANK PATCH SHEETS Notes: Notes: Notes: Notes: Notes: Notes: Notes: Page 10 of 11...
  • Page 11 0dBV, 0.5% max. wet, 0dBV, 1.0% max. dry, +4dBV, 0.65% max. wet, +4dBV, 1.2% max. DELAY RANGE .64i — 0.31 to 640ms 1.28i — 0.15 to 1280ms 2.56i — 0.31 to 2560ms MODULATION DEPTH 0 (none) to 8:1 SWEEP SPEED 0.1 sec to 25sec...

This manual is also suitable for:

2.56i1.28i

Table of Contents