Buffalo HDW-PDU3 MiniStation Air Reference Manual page 5

6
Power/Access LED
Indicates the power or hard drive access status.
On (Green): Power is on.
Blinking (Green): Accessing the hard drive when the MiniStation Air is connected to the PC with the USB data
cable.
On (Orange): The MiniStation Air is in mobile battery mode.
On (Red): The MiniStation Air battery is getting low. Please charge the battery.
Blinks once every 2 seconds (Red): The MiniStation Air is in sleep mode. Refer to "Sleep Mode" section below for
more information.
Blinks twice every 2 seconds (Red): The MiniStation Air is in sleep mode and its battery is getting low. Please
charge the battery.
7
Wireless LED
Indicates wireless status.
On (Blue): Power is on.
Blinking (Blue): Communicating wirelessly.
8
AOSS LED
Indicates AOSS connection status with the access point.
On (Amber): Successfully connected using AOSS. LED will turn off after 1 minute.
Double Blinks (Amber): Waiting for an AOSS security key.
Continuously Blinking (Amber): AOSS connection was not established. LED will turn off after 1 minute.
9
Battery LED
Lights when the MiniStation Air battery is being charged.
On (Red): Charging.
On (Green): Charge complete.
10
Wireless Security Label
Shows the MiniStation Air's SSID and encryption key. Refer to this label when connecting wirelessly to the
MiniStation Air for the first time.
11
Reset Button
To reset all settings, hold down this button until the wireless LED turns off (about 3 seconds). Resetting does
not delete data on the hard drive.
Before resetting, connect the USB power cable to the MiniStation Air to ensure constant power supply.
5