Chapter 1 - Overview; Diagrams - Buffalo HDW-PDU3 MiniStation Air Reference Manual

Chapter 1 - Overview

Diagrams

1
Power Button
Switch Power On or Off
Press and hold the power button for 3 seconds to power on the MiniStation Air. When the power is on, the
power/access LED is lit green. When the power is off, the power/access LED is off.
Switch Battery Charger Mode On or Off
Press and quickly release the power button when the power is off to use the MiniStation Air as a mobile
battery. When in battery charger mode, the power/access LED is lit orange.
Battery charger mode is not available while MiniStation Air is communicating wirelessly.
2
AOSS Button
This button is used to enable AOSS to connect to an access point. When the power is on, press and hold the
AOSS button for 2 seconds to start AOSS.
3
USB Port
Connect the USB data cable to this port to connect the MiniStation Air to your PC.
4
Power Port
Connect the USB power cable to this port to charge the battery.
5
Battery Charger Port
Connect your mobile device to charge it using the MiniStation Air.
4