WHEEL CIRCUMFERENCE ..........................6 INSTALLING THE BRACKET ......................... 6 INSTALLING THE SPEED SENSOR ....................... 6 INSTALLING THE MAGNET .......................... 6 CY-200W FEATURE LIST ............................ 7 MODE CHANGE ............................... 7 OPERATION PROCESS ............................8 USER SET ................................8 FUNCTIONAL SET ............................8 MEASURE MODE .............................
CY-200W is designed to give feedback required by the most discerning cyclists, in which is with all the functionality on one large easy to read display. CY-200W is a premier cycle computer for your challenge ride.
DISPLAY A. Average Speed Symbol if Upper/Lower Current Speed B. Current Speed Display C. Speed Scale Symbol Km/h or Mile/h D. PM Indicator E. Sub Display F. Mode Symbol G. Gender - Male H. Gender - Female SCAN 2 Users/wheel size setting...
INSTALLING THE SPEED SENSOR Check the position of the front pork to find the suitable point to attach the speed sensor. The distance between CY-200W & the speed sensor would be in 600mm. INSTALLING THE MAGNET Put the Magnet on the right spokes of the front wheel and must face the speed sensor. The max distance between the speed sensor and the spoke magnet should be 5 mm.
CY-200W FEATURE LIST Watch Feature Special Feature Cycling Feature Time of the Day User Settings Trip Distance Stopwatch Exercise Time Intelligent & Elegant Wheel MOTION Device Water Resistant Cumulative Calories of the Active Exercise Accurate Current Speed Easy to Read Large Display User Changeable Batteries(Sensor AVG.
OPERATION PROCESS USER SET In order to get the exact exercise result, enter your personal Data (Gender/Weight Unit Switch/Weight) into computer is necessary. • Go KCAL MODE by pressing "MODE" key, then press "SET" key for 3 secs to go User Set. By pressing "SET"...
MOTION ACTIVITIES DISPLAY When start to ride, the motion symbol will show on the display. If you work fast, the icon will act quickly. MEASURE MODE CURRENT SPEED When the user works, the computer will show his/her current speed as shown in picture. MXS MODE (Max Speed Mode) It would display user's Max Speed from the beginning to the current point.
Page 10
Note: If your time or distance is over the max. value (time 9 hr:59 min:59 sec) & (Distance: 999.99km),CY- 200W will not allow to measure correct average speed and show "Err" on the display. Once the time & distance value has been re-set, the average speed will show normally. DST MODE (Distance Mode) It would display user's distance from the beginning to the current point.
It's a good practice. Note: Do not expose CY-200W computer to extremely cold or hot temperatures i.e. don't leave your unite in direct sunlight for extended periods of the time.
CY-200W COMPUTER: Unscrew the back cover. Gently remove the battery and replace it with a new battery model CR2032, the (+) side facing up. SENSOR: Unscrew the back cover. Gently remove the battery and replace it with a new battery model CR2032, the (+) side facing up.
Need help?
Do you have a question about the CY-200W and is the answer not in the manual?
Questions and answers