Table of Contents
Advertisement
Quick Links
IB-PH5435-WC-E-032805.pmd
13 MEMORY CALLER ID TRIM PHONE
MODEL PH-5435
OPERATING INSTRUCTIONS
•
CALLER ID SHOWS YOU CALLER'S NAME & NUMBER
•
70 NAME & NUMBER CALLER ID MEMORY
•
TONE/PULSE SWITCHABLE DIALING
•
AUTOMATIC TIME & DATE DISPLAY
•
ONE-TOUCH CALLER ID CALL BACK
•
3 ONE-TOUCH SPEED DIAL BUTTONS
•
10 TWO-TOUCH SPEED DIAL MEMORY LOCATIONS
•
WALL/DESK USABLE
•
USES 3 SIZE "AA" BATTERIES
TO USE THIS CALLER ID FEATURES OF THIS PHONE,
YOU MUST SUBSCRIBE TO CALLER ID SERVICE,
AND REMEMBER TO INSTALL BATTERIES.
NOTE: READ AND FOLLOW THESE INSTRUCTIONS
BEFORE USING YOUR TELEPHONE.
1
(NOT INCLUDED)
IB-PH5435-WC-E-032805
4/1/2005, 12:28 PM
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Durabrand PH-5435
Summary of Contents for Durabrand PH-5435
-
Page 1: Operating Instructions
USES 3 SIZE “AA” BATTERIES TO USE THIS CALLER ID FEATURES OF THIS PHONE, YOU MUST SUBSCRIBE TO CALLER ID SERVICE, NOTE: READ AND FOLLOW THESE INSTRUCTIONS IB-PH5435-WC-E-032805.pmd MODEL PH-5435 OPERATING INSTRUCTIONS AND REMEMBER TO INSTALL BATTERIES. BEFORE USING YOUR TELEPHONE. -
Page 2: Table Of Contents
Calling back from the Caller ID List Storing Phone Numbers from the Caller ID List Deleting the Data from the Caller ID List Using Message Waiting / Mailbox Wall Mounting Trouble Shooting Limited Warranty IB-PH5435-WC-E-032805.pmd TABLE OF CONTENTS IB-PH5435-WC-E-032805 5 , 6 14,15 4/1/2005, 12:28 PM... -
Page 3: Important Safety Instructions
There may be a remote risk of electric shock from lightning. 10. Do not use the telephone to report a gas leak in the vicinity of the leak. 11. Do not allow anything to rest on the telephone cord. Do not locate this product where the cord will be damaged by persons walking on it. -
Page 4: Fcc Information
In most, but not all areas, the sum of the REN’s of all devices connected to one line should not exceed five (5.0). -
Page 5: Location Of Controls
11. RINGER (HIGH/LOW/OFF) SWITCH 12. CALLER ID DISPLAY 13. NEW CALL INDICATOR 14. DELE TE BUTTON 15. CALLBACK/ADJ. BUTTON 16. DOWN BUTTON 17. UP BUTTON 18. VOLUME CONTROL 19. TELEPHONE DESK STAND IB-PH5435-WC-E-032805.pmd LOCATION OF CONTROLS IB-PH5435-WC-E-032805 4/1/2005, 12:28 PM... -
Page 6: Getting Started
Step 1: Checking the Package Contents Your new PH-5435 Caller ID Trim Phone has all the features of a 13 memory telephone plus Caller ID display. As you unpack this set, make sure you have the following items in the package. -
Page 7: Step 2: Telephone Installation
3. Replace the battery door and snap it shut (Fig. 4). CAUTION Make sure that the telephone line cord is disconnected before opening the battery door. Replace the batteries when the LOW BATTERY INDICATOR appears in the display or when the display gets dim. -
Page 8: Connecting The Telephone
(Step 1). 2. Connect the straight telephone line cord to the LINE CORD jack on the bottom of the base unit and telephone outlet on the wall (Step 2). (If you want to mount the telephone on the wall, refer to Wall Mounting instruction of this booklet.) -
Page 9: Step 3: Setting Up The Telephone
TIME & DATE, AND TONE OR PULSE MODE You may need to set up the LCD contrast, language, area code, time and date, and tone or pulse mode for your telephone when you install the batteries for the first time or when you move to an area that has a different area code. -
Page 10: Basics
NO TE : 1. You do not have to set up the Time and Date manually because the telephone company will automatically update this with the Caller’s ID information when your phone rings (twice or more). To get back to the standby mode (for dialing), press the DELETE button repeatedly until the normal display shows. -
Page 11: Memory Dialing
1. Pick up the handset. 2. Press the AUTO button first, then press the stored two-touch memory number (0 to 9). 3. The phone will dial the numbers you stored into it. IB-PH5435-WC-E-032805.pmd MEMORY DIALING ” (short for programming) For two-touch dialing:... -
Page 12: Caller Id Features
The caller’s phone number and/or name will not appear in the following cases: - When the call is made through a telephone company which does not offer Caller ID service (including international calls), the display will show “ UNAVAILABLE ”. -
Page 13: Calling Back From The Caller Id List
Press a one-touch speed dial button (M1 to M3). The phone number is now stored in that memory button (Note: Only the number will be stored, not the name). IB-PH5435-WC-E-032805.pmd CALLER ID FEATURES For two-touch memory Press the AUTO button, and then any speed dial memories (0 to 9). -
Page 14: Deleting The Data From The Caller Id List
This phone will only respond to FSK type of message delivery. 1. If the message is sent by the telephone company which is preceded by a ring, the MESSAGE WAITING symbol will appear in the display. -
Page 15: Wall Mounting
(screws are not included). 4. Connect the straight short cord to the phone and jack. 5. Place the TELEPHONE BASE on the 2 mounting screws and gently push down to lock into place. IMPORTANT Before mounting the phone onto the wall, select a wall area with sufficient strength. -
Page 16: Trouble Shooting
Redial does not work IB-PH5435-WC-E-032805.pmd TROUBLE SHOOTING CHECK Is any plug disconnected from the modular phone plug? Is any jack improperly wired? Use another phone to test the jack. -
Page 17: Trouble Shooting
MEMORY button stored number NOTE: 1. If problems with your telephone service occur later, try to determine if the trouble is with the telephones you own or with the telephone company equipment. Unplug the telephone and try it on another jack in a different room or in a neighbor’s home to see if the phone line or the set is bad. -
Page 18: Limited Warranty
(personal checks will not be accepted) and sales receipt to: LENOXX ELECTRONICS CORP., 2 GERMAK DRIVE, CARTERET, N.J. 07008 This Class B digital apparatus complies with Canadian ICES-003.
Need help?
Do you have a question about the PH-5435 and is the answer not in the manual?
Questions and answers