Related Manuals for Exland EL-17PA1L
Summary of Contents for Exland EL-17PA1L
-
Page 1: User Manual
CCTV LCD Monitor User Manual For models: EL-17PA1L EL-19PA1L _____________________... -
Page 2: Table Of Contents
Contents 1. Introduction………............................1 2. Work Safety Information..........................2 2.1. Product Safety Precautions information.......................2 2.2. Safety Guidelines............................3 2.3. Important Notice Concerning Power Cord Selection...................3 2.3.1 For the United States and Canada..................... 3 2.3.2 For European Countries........................3 2.3.3 For the United Kingdom........................4 3. -
Page 3: Introduction
Introduction Thank you for purchasing the professional CCTV LCD Monitor and welcome to a fantastic new technology that will completely change the way you look at monitors. The following sections describe just a few of the major advantages of this LCD monitor. You’ll discover more of its wonderful features as you use it. -
Page 4: Work Safety Information
Work Safety Information Caution and Warning CAUTION !! RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No internal parts can be serviced by users. Refer servicing to qualified personnel. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS CCTV LCD MONITOR TO RAIN OR MOISTURE. -
Page 5: Safety Guidelines
Safety Guidelines WARNING This device must be operated with the original power supply. The socket outlet should be installed near the equipment and should be CAUTION easily accessible. Use a power cord that is properly grounded. Always use the appropriate AC power cord that is certified for the individual country. -
Page 6: For The United Kingdom
2.3.3 For the United Kingdom For your safety please read the following text carefully. If the fitted molded plug is unsuitable for the socket outlet, then the plug should be cut off and disposed of safely. Do not plug the cut-off plug into a socket outlet! There is a danger of severe DANGER electrical shock! If a new plug is to be fitted, please observe the wiring code as shown below. -
Page 7: Standards And Guidelines
Standards and Guidelines FCC Requirements This device complies with Part 15 of the FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must tolerate any interference encountered, including interference that may cause improper operation. -
Page 8: Rohs Compliance Statement
RoHS Compliance Statement This display defined in this user manual is 100% RoHS complaint and meets all the requirements set forth in European Union Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment. Information on Disposal for Your Old Product Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. -
Page 9: Hardware Installation
Hardware This chapter will guide you through the correct installation procedures for the LCD monitor. 4.1. Checking the Accessories Supplied LCD monitor body + Desk Stand x 1 pc AC power cord x 1 pc Adaptor x 1 pc D-Sub 15-pin cable (1.8 Meter) x 1 pc Remote controller x 1 pc (Optional) Battery (AAA) x 2 pc (Optional) 5. -
Page 10: Connections
5.2 Connections PC Audio S-Video BNC-In BNC-Out DC12V Audio-R Audio-L Item Connector Function ○ DC 12 Input Please use DC 12V, 3A Power Adaptor ○ Stereo RCA Audio Input Stereo audio input , “R“ is right channel (Red) of audio connector, (R/L) “L“... -
Page 11: Id Remote Controller
6. ID Remote Controller (Optional) The ID function is only applicable for some specific models ) . POWER switch. Press to turn ON or turn OFF the LCD Monitor. VIDEO SIGNAL Selection: Press the “AV1” ,“AV2”, “S-VIDEO”, “D-SUB”, “HDMI” button to enter the selected video source or press the “SOURCE”... -
Page 12: Osd Setup
Step 2: Control the monitor with ID No. Press “ID“ button, the screen will dispaly the“ ID NO.“, input 4 same digit on “ ID “ and press “ENTER“ to confrim the input. Then you can control the monitor. For example: When you setup the Monitor “ID NO“... -
Page 13: Color Temp
Sharpness Press “▲/+” or “▼/-“ to increase/decrease the “Blue bar” to adjust sharpness. Using sharpness to adjust the detail enhancement to the video picture. Increasing the figure will enhance the edges of objects in the video picture. Decreasing the figure will reduce enhancement. Tint Press “▲/+”... - Page 14 PIP (Video Mode) Press the “Menu” key on the buttons to call out the OSD “Menu” . Press “▲/+” or “▼/-“ to select “PIP” mode and press “Menu” key again to select the “PIP” option. Sub Source Press the “Menu” key to enter the Sub Source and press “▲/+” or “▼/-“ to select PC as the sub-screen . Sub Size Press the “Menu”...
- Page 15 Image Ratio (Video mode) In order to meet different applications in video output, there are 5 image ratio to choose (1) 5:4 Full (2) 4:3 Under-V (3). 4:3 Under-H (4). 5:4 Over-1 (5). 5:4 Over-2. Press “▲/+” or “▼/-“ key to select the format ratio you want.
-
Page 16: Osd Time
4. 5:4 Over-1 The format is over scan mode to make the image fill up the screen and cut about 2% on “Vertical” and 4% on “Horizontal” lines.. 5. 5:4 Over-2 The format is another over scan mode to make the image fill up the screen and cut about 3% on “Vertical”... -
Page 17: Osd Blend
OSD Blend If you want to change the background color of OSD Menu, you may press “▲/+” or “▼/-“ key to select “ Background color” . Press “Enter” key and press “▲/+” or “▼/-“ key to increase/decrease the “Blue bar”, the color will change from light blue to dark blue. - Page 18 Brightness Press“▲/+” or “▼/-“ to increase/decrease the “Blue bar” to adjust brightness. Adjusting brightness to enhance the level of dark area in the video picture such as night scenes and shadow scenes. Increasing brightness will make dark areas more visible. Contrast Press “▲/+”...
- Page 19 H-Position Use to change horizontal position of the picture. You may press “▲/+” or “▼/-“ key to select “H-Position” and press “▲/+” key to increase “Blue bar” to shift the picture to right or press “▼/-“ to decrease “Blue bar” to shift the picture to left.
-
Page 20: Auto Adjust
Auto Adjust Use “Auto Adjust” to fine-tune the display to perfectly synchronize to the video signal source under RGB mode. Press “Menu” to enter “OK” mode to activate the Auto Adjust function. Function (PC/VGA Mode) The setup is the same as page 12 for Function adjustment of “Video Mode”. -
Page 21: Troubleshooting Guide
8. Troubleshooting Guide When you experience issues with the CCTV LCD Monitor , before contacting your retailer where you made your purchase, please check the following items. The most common issue is with the connection of AV equipment or graphic card. We recommend that at the same time of troubleshooting, also refer to the AV equipment or graphic card user manual. -
Page 22: Applicable Video Timing For Pc- Analog Video
Applicable Video Timing for PC- analog Video The following table list are the better display quality modes for analogy signal (PC) supported by this LCD monitor. The LCD monitor will stop working or has poor picture quality when other modes out of below list input. -
Page 23: Technical Data
10. Technical Data Model EL-17PA1L EL-19PA1L System Panel Size 17" LCD 19" LCD Resolution 1280 x 1024 1280 x 1024 Pixel Pitch (H xV) 0.264(H) x 0.264(V) 0.294(H) x 0.294(V) Contrast Ratio 1000:1 1000:1 250 cd/㎡ 250 cd/㎡ Luminance Aspect Ratio...
Need help?
Do you have a question about the EL-17PA1L and is the answer not in the manual?
Questions and answers