Cleaning / Changing The Motor Protection Filter; Cleaning / Changing The Exhaust Filter; Spare Parts And Accessories - Dirt Devil Rebel 71 DD 7710 Operating Manual

3 Maintenance and care

3.2 Cleaning / changing the motor protection filter

28
CAUTION:
Clean the motor protection filter upon every filter bag change, and at
least every 3 months. Change the motor protection filter every time you
open a new dust filter bag packet, because there is a new motor protec-
tion filter in every dust filter bag packet.
Change the motor protection filter at least every 6 months.
CAUTION:
The filter is washable, but it may not be cleaned in dishwashers or
washing machines. Also, do not use cleaning agents or brushes with
hard bristles. Leave the filter to dry after cleaning it with water
(approx. 24 hours at room temperature). Only put it back in place when
it is completely dry.

3.3 Cleaning / changing the exhaust filter

33
CAUTION:
Clean the exhaust filter each time you clean the motor protection filter.
Change the exhaust filter as soon as it has deformed or is damaged at
the latest.
CAUTION:
The filter cannot be washed.
Do not use detergents or brushes with hard bristles to clean it.
Otherwise, the filter could get damaged.

3.4 Spare parts and accessories

The following accessories and spare parts can be reordered:
Item number
7710002 1 exhaust filter
7710022 4 dust filter bags + 1 motor protection filter
M203-4 1 parquet brush
M208-8 1 turbo brush
M219 1 mini-turbo brush "Fellino"
29 30
34 35
Description
31
1. Switch off the appliance.
2. Pull the plug out of the plug socket.
3. Take the dust filter bag out of the appliance
ZChapter 3.1, 'Changing the dust filter bag'.
4. Open the filter holder (Fig. 28).
5. Take the filter out of the filter holder (Fig. 29) and rinse the filter thor-
oughly under cold or luke-warm running water (Fig. 30).
6. Leave the filter to dry (approx. 24 hours at room temperature).
7. Insert the filter back into the filter holder (Fig. 31).
8. Close the filter holder again (Fig. 32).
9. Put the dust filter bag back in
ZChapter 3.1, 'Changing the dust filter bag'.
36
1. Switch off the appliance.
2. Pull the plug out of the plug socket.
3. Open the exhaust filter cover as shown (Fig. 33).
4. Take the filter out of the appliance (Fig. 34).
5. Knock out the dirt and use the 3-in-1 combi-nozzle supplied
to clean it thoroughly (Fig. 35).
6. Put the filter back into its holder (Fig. 36).
7. Put the exhaust filter cover into its recesses (Fig. 37).
8. Push the cover until it locks into place.
Accessory parts and spare parts can be reordered from:
ZPage 38, "International Service"
CAUTION:
Only use original spare parts from the scope of delivery or those that
you have purchased by reordering.
32
click! click!
37
11