Lex 3I525D Manual
  1. Manuals
  2. Brands
  3. Lex Manuals
  4. Motherboard
  5. 3I525D
  6. Manual

Lex 3I525D Manual

Lex 3i525d; 3i525u multi-lan board, intel atom d525 1.8 ghz cpu, ddr3 800mhz, all-in-one, pcie mini card for pcie & usb interface
Hide thumbs
Table of Contents

Advertisement

Quick Links

3I525D / 3I525U
DDR3 800 MHz / VGA / 4 LAN / Mini card /
3G SIM Card Reader
Intel Atom D525 1.8 GHz CPU, DDR3 800MHz, All-In-One
PCIe mini card for PCIe & USB interface
SATA, 7 USB, CF
Multi-LAN Board
NO. 3I525D / 3I525U
Release date: MAY. 13 . 2011

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3I525D and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lex 3I525D

Summary of Contents for Lex 3I525D

  • Page 1 DDR3 800 MHz / VGA / 4 LAN / Mini card / 3G SIM Card Reader Intel Atom D525 1.8 GHz CPU, DDR3 800MHz, All-In-One PCIe mini card for PCIe & USB interface SATA, 7 USB, CF Multi-LAN Board NO. 3I525D / 3I525U Release date: MAY. 13 . 2011...

  • Page 2: Table Of Contents

    1-2 SPECIFICATION ......................1-3 INSTALLING THE SO-DIMM ..................1-3-1.1 REMOVING THE SO-DIMM ................... 1-4 DIRECTIONS FOR INSTALLING THE MINI CARD ............ 1-5 PACKING LIST - 3I525D / 3I525U ................CHAPTER 2 HARDWARE INSTALLATION ..............2-1 UNPACKING PRECAUTION ..................2-2 UNPACKING CHECKUP .....................
  • Page 3 I C INTERFACE ......................3-9 DC 12V-IN POWER CONNECTOR ................3-10 LAN PORT ........................ 3-11 DC +5 /+12V VOLTAGE OUTPUT CONNECTOR ............ 3-12 TOUCH SCREEN DEVICE (OPTION) ..............3-13 LVDS INTERFACE (OPTION) .................. 3-14 USB PORT ....................... 3-15 MINI CARD ....................... 3-16 LED ...........................
  • Page 4 Copyright This manual is copyrighted and all rights are reserved. It does not allow any non authorization in copied, photocopied, translated or reproduced to any electronic or machine readable form in whole or in part without prior written consent from the manufacturer.

  • Page 5: Warning

    Warning ! 1. Battery Battery on board is consumables. We doesn’t guarantee the life time of it. 2. Fanless solution with HDD Please be aware of specification & limitation for HDD when fanless solution is implemented. 3. We will not give further notification if there is any change about the product information and the manual.

  • Page 6: Hardware Notice Guide

    Hardware Notice Guide 1. Before installing the power supply with this motherboard, please attach the 12V/DC ( 2 pin connector )of the adapter to motherboard first. After that, plug the adapter power to AC outlet. Always normally shut down the computer before you move the system unit or remove the power supply from the motherboard.
  • Page 7 Photo 1 Insert Unplug...

  • Page 8: Chapter 1 General Information

    The built-in LAN option are four Intel 82583V for 3I525U or four RLT8111DL for 3I525D with RJ45 for 10/100/1000 Mbps Ethernet. 3I525D & 3I525U also offer 1 COM port supporting the TTL signal level to meet the needs of COM port connectivity.

  • Page 9: Major Feature

    1-1 Major Feature 1. Intel Atom D525 1.8 GHz CPU 2. Intel Pineview-D and ICH8M (82801HBM) chipset on board 3. Intel Luna Pier Refresh Pineview-D Integrated Graphics Engine 4. 1 x DDR3 SO-DIMM socket (max. 4GB) or On board DDR3 SDRAM 1GB and 1 x DDR3 SO-DIMM socket (max. 2GB) 5.

  • Page 10: Specification

    Support Compact Flash card type II for ATA interface On board SSD 2/4/8 GB 8. LAN : 4 x Intel 82583V LAN chip for 3I525U or 4 x Realtek RLT8111DL for 3I525D with 10/100/1000 Mbps for PCIe x 1 interface 9. Storage Device : 1 x 50 pins Compact Flash Socket 10.

  • Page 11: Installing The So-Dimm

    1-3 Installing the SO-DIMM 1. Align the SO-DIMM with the connector at a 45 degree angle. 2. Press the SO-DIMM into the connector until you hear a click.
  • Page 12 Notices: 1.The connectors are designed to ensure the correct insertion. If you feel resistance, check the connectors & golden finger direction, and realign the card. 2. Make sure the retaining clips (on two sides of the slot) lock onto the notches of the card firmly.

  • Page 13: 1-3-1.1 Removing The So-Dimm

    1-3-1.1 Removing the SO-DIMM 1. Release the SO-DIMM by pulling outward the two retaining clips and the SO-DIMM pops up slightly. 2. Lift the SO-DIMM out of its connector carefully.

  • Page 14: Directions For Installing The Mini Card

    1-4 Directions for installing the Mini Card 2. Plug in the Mini Card in a 45 angle 1. Unscrew the screw on the board 3. Gently push down the Mini Card and screw the screw back.

  • Page 15: Packing List 3I525D / 3I525U

    1-5 Packing List 3I525D / 3I525U 5 USB Cable 1 Mainboard DC Cable 2 Utility CD Disk 7 SATA Power Cable 3 User’s Manual 8 SATA Data Cable 4 DC 12V Power Adapter (2P) The packing list above is for the users who purchase single motherboard. The users who purchase the board with chassis may refer to the packing list in the Assembly Guide.

  • Page 16: Chapter 2 Hardware Installation

    Please follow section 1-5, 2-1 and 2-2 to check the delivery package and unpack carefully. Please follow the jumper setting procedure. 2-1 Unpacking Precaution The 3I525D / 3I525U board has been well packed with an anti-static bag to protect its sensitive components and circuitry from damage due to static electric discharge. NOTE! 1.

  • Page 17: Unpacking Checkup

    2-2 Unpacking checkup First of all, please follow all necessary steps of section 2-1 to protect 3I525D / 3I525U from electricity discharge. With reference to section 1-5, please check the delivery package again with following steps: 1. Unpack the 3I525D / 3I525U...

  • Page 18: Dimension

    2-3 Dimension 56.52 35.43 20.45 2.99 32.7 54.4 63.7 75.5 92.01 108.7 125.8 137.18...

  • Page 19: Layout - 3I525D

    Layout - 3I525D JVU5 CFP1 MPCE1 SWP1 CPO1 LED1 CIO2 CU41 CIO1 MPCE2 JSD1 JVP1 CU31 JVL1 JSB1 CPP1 LVDS1 FAN1 CG11 SODIM1 CPI11 CPI1 COS1 COH1 CPI12...

  • Page 20: Layout - 3I525U

    2-4-1 Layout - 3I525U JVU5 CFP1 MPCE1 SWP1 CPO1 LED1 CIO2 CU41 CIO1 MPCE2 JSD1 JVP1 CU31 JVL1 JSB1 CPP1 LVDS1 FAN1 CG11 SODIM1 CPI11 CPI1 COS1 COH1 CPI12...

  • Page 21: Diagram- 3I525D / 3I525U

    Diagram- 3I525D / 3I525U JVU5 MPCE1 CFP1 SWP1 CPO1 LED1 CIO2 CIO1 MPCE2 JSD1 JVP1 JVL1 JSB1 CPP1 LVDS1 FAN1 CG11 SODIM1 CPI11 COS1 COH1 CPI12...

  • Page 22: Bottom Side Diagram

    2-5-1 Bottom Side Diagram SATA1 SATA2 Back Panel LAN 3 LAN 1 DC 12V IN LAN 4 LAN 2 LAN 3 LAN 1 DC 12V IN LAN 4 LAN 2...

  • Page 23: Install Memory

    2-6 Install Memory This motherboard provides one 204-pin Small Outline Dual In-line Memory Module (SODIMM) socket for memory expansion available maximum to of 2GB/4GB DDR3 SDRAM. DDR3 clock supports: DDR3 800MT/S Valid Memory Configurations Total Memory System Accept or Not DIMM1 Max.

  • Page 24: List Of Jumpers

    NOTE! When you install SODIMM module fully into the SODIMM socket, the eject tab should be locked into the SODIMM module very firmly and fit into its indention on both sides. WARNING! Once you hear " Beep Beep Beep" sounds after turning on the power , please check if the DRAM is installed properly or not.

  • Page 25: Jumper Setting Description

    2-8 Jumper Setting Description A jumper is ON as a closed circuit with a plastic cap covering two pins. A jumper is OFF as an open circuit without the plastic cap. Some jumpers have three pins, labeled 1, 2, and 3. You could connect either pin 1 and 2 or 2 and 3. The below figure 2.2 shows the examples of different jumper settings in this manual.

  • Page 26: Jsd1: Dpc Duty Select

    JSB1: CMOS DATA SET Note: Do not clear CMOS unless 1. Troubleshooting 2. Forget password JSB1 Description 3. You fail over-clocking system *1-2 *Normal Set CMOS Data Clear JSB1 Normal Clear Setting 2-10 JSD1: DPC Duty select JSD1 Description Low 0% (Low level ) *2-3 Hi 100% (3.3V level) Note: Please be cautious about voltage setting.

  • Page 27: Jvl1: Lcd Panel Power Select

    2-11 JVL1: LCD panel power select JVL1 Description *2-3 +3.3V Note: Please be cautious about voltage setting. JVL1 *+3.3V 2-12 JVP1: LVDS panel Inverter power select JVP1 Description 1-2* +12V* Note: Please be cautious about voltage setting. JVP1 +12V*...

  • Page 28: Jvu5: Usb Port 5 Voltage Select

    2-13 JVU5: USB Port 5 Voltage select JVU5 Description 1-2* +5V* +3.3V Note: Please be cautious about voltage setting. JVU5 +5V* +3.3V...

  • Page 29: Chapter 3 Connection

    Chapter-3 Connection This chapter provides all necessary information of the peripheral's connections, switches and indicators. Always power off the board before you install the peripherals. 3-1 List of Connectors CA3: Line-out / Line-in / Mic-in 2x5 pin (2.0mm) Wafer CC1: COM1 5 pin (2.0mm) Wafer CC2: COM2 DB9 Connector CF1: CF socket 50pin CFP1: FP port 2x5 pin (2.0mm) Wafer...

  • Page 30: Fan Connector

    List of Connectors CU5: USB 5 port 4pin(1.25mm) Wafer CU6: USB 6 port 4pin(1.25mm) Wafer CU7: USB 7 port 4pin(1.25mm) Wafer CU8: USB 8 port 4pin(1.25mm) Wafer FAN1: CPU FAN 3pin Wafer LED1: power LED(Blue) MPCE1/2: Two Mini card socket 52pin SATA1,SATA2: Two SATA connector 7pin SODIMM: DDR3 SO-DIMM 204pin BAT1: 3V Battery holder 2pin...

  • Page 31: Vga Port Connevtor

    DDC DATA VGA CG1 3-4 Audio Port The 3I525D / 3I525U has an on-board AC'97 3D sound interface. There are the connectors of LINE OUT, MIC-IN and connectors. pin1 The MIC-IN Jack and header are for audio sound input. The LINE-OUT connector is a 4-pin Jack for audio sound output.

  • Page 32: Cf Card Reader

    3-5 CF Card Reader 3I525D / 3I525U configures Compact Flash Storage Card in IDE mode. It will use IDE channel when Compact Flash card is plugged in. This socket supports CF Card Type I/II socket spec. CF Socket 50pin--CF1 CF1: CF Socket For True IDE Mode (50pin CF Socket) PIN NO.

  • Page 33: Com Port Connector

    3-6 COM Port Connector CC2 : RS232 Mode COM1 connector ( D-SUB 9pin) PIN NO. Description PIN NO. Description CC2 : RS485 Mode COM1 connector ( D-SUB 9pin) PIN NO. Description PIN NO. Description RS485 TX+ RS485 TX- Note : 1. CC2 DB9 port share with VGA DB15 2.

  • Page 34: Digital Input / Output / Watch Dog Time

    3-7 Digital Input / Output / Watch Dog Time ● CIO1 DIO 0~3 (2x5pin 2.0mm wafer) PIN NO. Description PIN NO. Description DO-3 DI-0 DO-2 DI-1 DO-1 DI-2 DO-0 DI-3 Note: All DI-0~7 external pull Hi 10KΩ to +V5S ● CIO2: DIO 4—7 (2x5pin 2.0mm wafer) PIN NO.

  • Page 35: Io Device:f75111 Under Dos

    3-7-1 IO Device:F75111 under DOS The Sample code source you can download from Source file: F75111_Dos_Src.rar https://tprd.info/lexwiki/index.php/IO_Device:F75111_under_DOS Binary file: F75111_Dos_Bin.rar USERNAME & PASSWORD: temp How to use this Demo Application 1.Boot Ms-Dos Operating System 2.execute "75WDT.EXE" binary file 3.Input 1 to Enable WDT timer or input 0 to Disable it. 4.input numbers of second for chip countdown and Reset Computer Introduction Enable Watch Dog Timer...

  • Page 36: Io Device: F75111 Under Windows

    3-7-2 IO Device: F75111 under Windows The Sample code source you can download from Source file: F75111_DIOSrc.rar https://tprd.info/lexwiki/index.php/IO_Device:F75111 Binary file: F75111_DemoBin.rar USERNAME & PASSWORD: temp How to use this Demo Application 1. Press the "Start" button to test DIO function 2.
  • Page 37 p.s. f75111 send "F75111_SetWDTEnable(BYTE byteTimer)" including a parameter "timer", if there's no disable signal (F75111_SetWDTDisable()) to stop it before timer countdown to 0, System will reboot. if there's disable signal received, resent Enable WDT signal, for a loop to prevent from reboot Introduction Initial Internal F75111 port address (0x9c) define GPIO1X, GPIO2X, GPIO3X to input or output...
  • Page 38 Set output value void F75111::InterDigitalOutput(BYTE byteValue) BYTE byteData = 0; byteData = (byteData & 0x01 )? byteValue + 0x01 : byteValue; byteData = (byteData & 0x02 )? byteValue + 0x02 : byteValue; byteData = (byteData & 0x04 )? byteValue + 0x04 : byteValue; byteData = (byteData &...

  • Page 39: Io Device: F75111 Vb6 Under Windows

    Disable WatchDog void F75111_SetWDTDisable () WriteByte(F75111_INTERNAL_ADDR,WDT_CONFIGURATION,0x00); // Disable WatchDog 3-7-3 IO Device: F75111 VB6 under Windows The Sample code source you can download from Source file: 75111_VB_v10.rar https://tprd.info/lexwiki/index.php/IO_Device:F75111_VB6 Binary file: 75111_VB_Src.rar USERNAME & PASSWORD: temp How to use this Demo Application A Function - Enable WDT timer ,Key-in the value by seconds then system will reboot after value which you key-in in left text box !! B Function - Disable WDT timer ,Push down the button then WDT timer value will be clear !!
  • Page 40 SDK Function Introduction Function EnableWDT Function EnableWDT(timer As Integer) Call WriteI2CByte(&H3, &H3) Call WriteI2CByte(&H37, timer) Call WriteI2CByte(&H36, &H73) End Function Function DisableWDT Function DisableWDT() Call WriteI2CByte(&H36, &H0) End Function Function SetDOValue Function SetDOValue(dovalue As Integer) Call WriteI2CByte(&H23, &H0) Call WriteI2CByte(&H20, &HFF) Call WriteI2CByte(&H2B, &HFF) Call WriteI2CByte(&H21, dovalue) End Function...

  • Page 41: Io Device: F75111 Under Linux

    3-7-4 IO Device: F75111 under linux The Sample code source you can download from Source file: F75111v2.0L.tar.gz https://tprd.info/lexwiki/index.php/IO_Device:F75111_under_linux Binary file: F75111v2.0LBin.tar.gz USERNAME & PASSWORD: temp How to compile source code 1. Compile source code with Code::Blocks download and install the Code::Block with command "apt-get install codeblocks" Open an exist project(F75111.cbp) in Code::Blocks, click the compile button ( add an option 'pkg-config --libs gtk+-2.0 gthread-2.0' in "Project->Build Option->...
  • Page 42 1. Press the "Start" button to test DIO function 2. Press the "Enable" button to test WDT function 3. Press the "Disable" button to disable WDT 4. Check the "Enable Loop" box and press "Enable" to do WDT loop test 5.
  • Page 43 Set output value void F75111::InterDigitalOutput(BYTE byteValue) BYTE byteData = 0; byteData = (byteData & 0x01 )? byteValue + 0x01 : byteValue; byteData = (byteData & 0x02 )? byteValue + 0x02 : byteValue; byteData = (byteData & 0x04 )? byteValue + 0x04 : byteValue; byteData = (byteData &...
  • Page 44 Enable WatchDog void F75111_SetWDTEnable (BYTE byteTimer) WriteByte(F75111_INTERNAL_ADDR,WDT_TIMER_RANGE ,byteTimer); // set WatchDog range and timer WriteByte(F75111_INTERNAL_ADDR,WDT_CONFIGURATION,WDT_TIMEOUT_FLAG | WDT_ENABLE | WDT_PULSE | WDT_PSWIDTH_100MS); // Enable WatchDog, Setting WatchDog configure Disable WatchDog void F75111_SetWDTDisable () WriteByte(F75111_INTERNAL_ADDR,WDT_CONFIGURATION,0x00); // Disable WatchDog...

  • Page 45: I C Interface 2

    3-8 I C Bus Interface CO1:I C Bus 4pin (1.25mm)Wafer PIN NO. Description +3.3V I C CLOCK I C DATA pin1 3-9 DC 12V-IN power connector CPI1 : DC 12V-in power Jack DC 12V IN CPI1 PIN NO. Description +12V DC-IN NOTE: Very important check Dc-in Voltage CPI11 : DC 12V-in Internal connector (4pin ATX power 4.20mm) PIN NO.

  • Page 46: Lan Port

    Link Led ACT Led ACT Led LAN light Orange Orange Orange Green Orange Orange Orange Orange Realtek RTL8111C (3I525D) LAN LED Speed 10 Mbps 100 Mbps 1000 Mbps Back Side Fornt Side Back Side Fornt Side Back Side Fornt Side...

  • Page 47: Dc +5 /+12V Voltage Output Connector

    3-11 DC +5 / +12V Voltage output connector pin1 CPO1 CPO1 : +12V / +5V DC voltage output (4pin 2.0mm Wafer) PIN NO. Description +12V* * Note : Attention ! Check Device Power in spec 3-12 Touch screen device (Option) CT1: Touch screen (2x5 pin 2.0mm wafer) Default use USB interface, can change COM interface By oem BOM .

  • Page 48: Lvds Interface (Option)

    3-13 LVDS Interface (option) LVDS1 LVDS1: 18bits LVDS interface from DC525 chipset (2x15 pin 1.25mm wafer) PIN NO. PIN NO. Description Description PWM dimming +LCD (5V or 3.3V) +LCD (5V or 3.3V) Audio SPDIFO pin1 Channel-0-DATA2+ Channel-0-CLK+ Channel-0-DATA2- Channel-0-CLK- Channel-0-DATA1+ Channel-0-DATA0+ Channel-0-DATA1- Channel-0-DATA0-...

  • Page 49: Usb Port

    3-14 USB Ports CU1 / CU2 / CU31 / CU41: USB1 / USB2 ports (USB Type A connector) PIN NO. Description PIN NO. Description pin1 DATA - DATA - DATA + DATA + Note : CL1 / CL2 connector share with USB CU31, CU41 CU3 / CU4: USB3 / USB4 ports (4pin 1.25mm Wafer) CU5: USB5, CU6: USB6, CU8: USB8 PIN NO.

  • Page 50: Mini Card

    3-15 Mini card MPCE1 / MPCE2: Support USB and PCIe by one Interface (Mini card socket 52pin) Description Description PIN NO. PIN NO. NC(Wake up) +3.3V +1.5V NC (CLKREQ-) UIM_PWR UIM_DATA PCIe-CLK- UIM_CLK MPCE1 pin52 pin52 PCIe-CLK+ UIM_RESET UIM_VPP pin1 pin1 MPCE2 PRST-...

  • Page 51: Led

    3-16 LED LED1 Front side LED LED1 : Power LED (2pin 2.0mm Blue LED) 3-17 Front Panel connector SWP1 pin1 CFP1 CFP1 FP connector (2x5pin 2.0mm wafer) pin1 PIN NO. Description PIN NO. Description HDD LED+ HDD LED- LAN1 LED+ LAN1 LED- LAN2 LED+ LAN2 LED-...

  • Page 52: Chapter 4 Introduction Of Bios

    Chapter 4 Introduction of BIOS The BIOS is a program located in the Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gains control. The BIOS first operates an auto-diagnostic test called POST (Power on Self Test) for all the necessary hardware, it detects the entire hardware devices and configures the parameters of the hardware synchronization.

  • Page 53: Getting Help

    4-2 Getting Help Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu/ Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item.
  • Page 54 Standard CMOS Features This Menu is for basic system configurations. Advanced BIOS Features This menu is to set the Advanced Features available in your system. Advanced Chipset Features This menu is to change the values in the chipset registers and optimize your system performance.

  • Page 55: Standard Cmos Features

    4-4 Standard CMOS Features The items in Standard CMOS Setup Menu are divided into several categories. Each category includes none, one or more than one setup items. Use the arrow keys to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want to modify with this item.

  • Page 56: Advanced Bios Features

    4-5 Advanced BIOS Features Phoenix AwardBIOS CMOS Setup Utility Advanced BIOS Features Press Enter Hard Disk Boot Priority Press Enter USB Boot Priority Item Help Disabled Virus Warning Hyper-Threading Technology Enabled Quick Power On Self Test Enabled Menu Level > USB-FDD First Boot Device Second Boot Device...
  • Page 57 Hyper-Threading Technology This item allows you to enable or disable Intel Hyper Threading technology. Quick Power On Self Test This category speeds up Power On Self Test (POST) after you power on the computer. If this is set to Enabled, BIOS will shorten or skip some check items during POST. Enabled (default) Enable quick POST Disabled Normal POST...

  • Page 58: Hard Disk Boot Priority

    OS Select For DRAM > 64MB Allows OS2 to be used with >64MB or DRAM. Settings are Non-OS/2 (default) and OS2. Set to OS/2 if using more than 64MB and running OS/2 4-5-1 Hard Disk Boot Priority Phoenix – AwardBIOS CMOS Setup Utility Hard Disk Boot Priority 1.

  • Page 59: Advanced Chipset Features

    4-6 Advanced Chipset Features The Advanced Chipset Features Setup option is used to change the values of the chipset registers. These registers control most of the system options in the computer. Phoenix-AwardBIOS CMOS Setup Utility Advanced Chipset Features Item Help System BIOS Cacheable [ Enabled ] PCI Express Root Port Func...

  • Page 60: Integrated Peripherals

    PCI-E Compliancy Mode This item determines PCI Express bus in mode? V1.0a (default) it’s compliant PCI Express in v1.0a specification. V1.0 it’s compliant PCI Express in v1.0 specification. 4-7 Integrated Peripherals Phoenix-AwardBIOS CMOS Setup Utility Integrated Peripherals Item Help OnChip IDE Device [ Press Enter ] Super IO Device [ Press Enter ]...
  • Page 61 IDE HDD Block Mode Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read/writes per sector the drive can support. The settings are: Disabled, Enabled (default).

  • Page 62: Super Io Device

    4-7-2 Super IO Device Phoenix-AwardBIOS CMOS Setup U tility Super IO Device [ 3F8/IRQ4 ] Onboard Serial Port 1 Item Help COM1 422/485 flow control [ Disabled ] Onboard Serial Port 2 [ 2F8/IRQ3 ] Menu Level >> COM2 422/485 flow control [ Disabled ] PWRON After PWR-Fail [ Former-Sts ]...

  • Page 63: Power Management Setup

    USB 1.0 Controller Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a USB peripherals. Settings are: Enabled (default), Disabled. USB 2.0 Controller Select Enabled if your system contains a Enhanced Serial Bus (USB) controller and you have a USB peripherals.
  • Page 64 PCI Express PM Function Please refer to section 4-9 ACPI Function This item allows you to Enabled/Disabled the Advanced Configuration and Power Management (ACPI). Settings are: Enabled (default) and Disabled. Video Off Method This determines the manner in which the monitor is blanked. DPMS (default) Initial display power management signaling.

  • Page 65: Pci Express Pm Function

    4-9 PCI Express PM Function Phoenix-AwardBIOS CMOS Setup Utility PCI Express PM Function Item Help PCI Express PME [ Disabled ] ► Menu Level ► ↑↓→← ↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults PCI Express PME This item allows you to wake-up system, when PME event has presence.

  • Page 66: Irq Resources

    Resource Controlled By The Award Plug and Play BIOS can automatically configure all of the boot and Plug and Play compatible devices. However, this capability means absolutely nothing unless you are using a Plug and Play operating system such as Windows 95/98. If you set this field to "manual", choose a specific resource by going into each sub menu that follows this field (a sub menu is preceded by a ">").

  • Page 67: Pc Health Status

    4-11 PC Health Status This section shows the status of your CPU, Fan, and overall system. This is only available when there is Hardware Monitor function onboard. Phoenix-AwardBIOS CMOS Setup Utility PC Health Status VCC3V 3.31V Item Help Vcore 1.15V Vin2 1.05V Menu Level ►...

  • Page 68: Set Supervisor/ User Password

    4-13 Set Supervisor/ User Password You can set supervisor password, user password, or both. The differences are: Supervisor password: You can enter the setup menus and change the options. User password: You can enter the setup menus but do not have the right to change the options.

  • Page 69: Chapter 5 Driver Installation

    Chapter 5 DRIVER INSTALLATION There is a SYSTEM INSTALL CD disk in the package. This CD has all the drivers you need and some free application programs and utility programs. In addition, this CD also includes an auto-detect software which can tell you which hardware is installed and which driver is needed so that your system can function properly.
  • Page 70 Auto install driver Menu 1. INF install Intel PineView chipset system driver 2. VGA install on-board VGA driver 3. SOUND install VIA HID Audio Codec Audio driver 4. DIRECTX install DirectX 9 driver 5. LAN to LAN install driver readme file Each selection is illustrated as below: ...

  • Page 71: Inf Install Intel Pineview Chipset System Driver

    5-1 INF Install INTEL PineView Chipset system driver 1. Click INF when System Install MENU 2. Click NEXT when Chipset Software appears. Install Utility appears. 3. This license agreement appear, 4. This is Readme information appear, click Yes, the Click NEXT. Click NEXT.
  • Page 72 5.Click NEXT. 6.Click Finish to restart computer. NOTE: SYSTEM INSTALL will auto detect file path X:\driver\Intel\I945\INF\infinst911autol.exe This driver supports WINDOWS XP32/XP64/Win7 32/Win7 64...

  • Page 73: Vga Install Intel Pineview Vga Driver

    5-2 VGA Install Intel PineView VGA Driver 1.Click VGA when System Install 2.Click NEXT when Intel ® Chipset MENU appears. Graphics Driver Software Setup appears. 3.Click NEXT when Intel ® Graphics 4.Click YES, This Announce CopyRight . Media Accelerator Driver Software appear.
  • Page 74 5.Click NEXT. 6.Click FINISH to Restart Computer. NOTE: The path of the file For WINDOWS XP 32 X:\driver\Intel\D510\VGA\winxp.exe For WINDOWS XP 64 X:\driver\Intel\D510\VGA\winxp64.exe For WINDOWS 7 32 X:\driver\Intel\D510\VGA\win7.exe For WINDOWS 7 64 X:\driver\Intel\D510\VGA\winvista64.exe...

  • Page 75: Sound Install Via Hid Audio Codec Driver

    5-3 SOUND Install VIA HID Audio Codec Driver 1.Click SOUND when System Install 2.Click Next . MENU appears. 3.Click Next . 4.Click Next to begin installing driver. The program might be few minutes.
  • Page 76 6.Click FINISH to Restart Computer. 5.Click NEXT. NOTE: The path of the file For XP 32/XP 64 X:\driver\INTEL\I945\SOUND\VIAHDAudV7500a_Setup.exe For Win 7 32/Win7 64 X:\driver\INTEL\I945\SOUND\VIAHDAudV7500a_Setup.exe...

  • Page 77: How To Update Bios

    STEP 2. Copy utility program to your bootable disc. You may copy it from DRIVER CD X:\Dirver\bios\AWDFLASH.EXE or download it from our web site. STEP 3. Copy the latest BIOS for your LEX motherboard from our web site to your bootable disc.
  • Page 78 Appendix A: Power Consumption Test Condition Item Spec Intel Atom D525 1.8Ghz SDRAM DDR3 800 / 1GB Operating System Windows XPP/SP3 Test Program 3D Mark 2001SE HDD 3.5" SATA Standard HDD HDD 2.5" SATA Slim Type HDD Test Result for reference ! Start up Operation Shut down...
  • Page 79 Appendix B: Resolution list 640 x 480 x ( 256 / 16bit / 32bit ) 800 x 600 x ( 256 / 16bit / 32bit ) 1024 x 768 x ( 256 / 16bit / 32bit ) 1152 x 864 x ( 256 / 16bit / 32bit ) 1280 x 600 x ( 256 / 16bit / 32bit ) 1280 x 720 x ( 256 / 16bit / 32bit ) 1280 x 768 x ( 256 / 16bit / 32bit )
  • Page 80 Appendix C: Memory combination for 3I525D / 3I525U DDR3 DRAM Total Capacity On board SODIMM ─ 1GB (128 x 8) x 8 ─ 1GB (128 x 8) x 8 1GB (128 x 8) x 8 1GB (128 x 8) x 8 ─...

This manual is also suitable for:

3i525u

Table of Contents