Advertisement
Quick Links
Advertisement
Related Manuals for Saje aroma geni
Summary of Contents for Saje aroma geni
- Page 1 ULTRASONIC NEBULIZER Instruction Manual PLEASE READ AND SAVE THIS MANUAL...
- Page 2 ULTRASONIC NEBULIZER ATOMISEUR ULTRASONIQUE Live healthier by improving the quality of the air you breathe.
-
Page 3: Table Of Contents
TABLE OF CONTENT Function Specification Installation Maintenance Troubleshooting Warnings Congratulations on purchasing your AromaGeni Ultrasonic Aromatherapy Diffuser! Please keep this manual for future reference. -
Page 4: Function
FUNCTION With an innovative and unique design, this Ultrasonic • Aromatherapy Diffuser brings fashion and modern science into the heart of your home or office! • Uses an Ultrasonic, heat-free system to break up and disperse the essential oil molecules into the air, the benefits of the essential oils can be easily and quickly enjoyed. -
Page 5: Specification
SPECIFICATION Product size: 108 mm x 220 mm Voltage: 24V Power: 10W Water Capacity: 80ml 1. Cover A (External) 2. Cover B (External) 3. Blowhole 4. LED Light 5. Max. Water Level Line 6. Water Tank 7. Ceramic Disk 8. On/off Button 9. -
Page 6: Installation
• Distilled water and pure water are not suitable for the machine. • Always use pure Saje Diffuser Blends. If the unit is bumped during operation, water could • seep into the internal space of the machine. If this should happen, unplug the power supply immediately, empty the water tank, and allow the machine to dry in a well-ventilated space for 3 days prior to re-use. - Page 7 1. First remove cover A, then cover B. do not exceed the max. water level line 2. Fill water tank with tap water (max. 80 ml).
- Page 8 3. Add 10-15 drops of your favourite Saje Diffuser Blend to the water. 4. Replace cover B then cover A ensuring they are securely in place.
- Page 9 5. Plug in the adapter and press the button 6. Do not tilt the machine during operation. 7. Press button once for misting with light on, press button twice for misting with light off. Press button a third time to turn off.
-
Page 10: Maintenance
MAINTENANCE 2. Remove cover A then 1. Press the button and cover B. unplug the adapter. - Page 11 3. Empty water from the back side. warning: do not empty water from the front side 4. Use a clean swab to clean the unit.
-
Page 12: Troubleshooting
TROUBLESHOOTING symptom possible cause solution Power supply is not Plug in the power adapter connected and press button Signal sensor covered by Use a swab to clean the furring furring Insuffucuent water Refill sufficient tap water No mist (Lower than the sensor) Overfill water tank (beyond Dump the excess water the max. -
Page 13: Warnings
WARNINGS In case of smoke, unusual aroma, undue noise, etc. • unplug the unit immediately and discontinue use. Further use may result in fire or electrical shock. • In order to allow heat to dissipate properly, the adaptor must be covered. The unit should not be disassembled by the owner;...
Need help?
Do you have a question about the aroma geni and is the answer not in the manual?
Questions and answers