Advanced Properties; Link Parameters - SMC Networks EtherPower II 1000 User Manual

C
ONFIGURING AND

Advanced Properties

Select the "Advanced Properties" tab in the utility window to view
the network card's configuration options. This window is shown
below and the various items are described in the following table.

Link Parameters

The network card's link speed, PHY type and duplex mode can
all be set from this page. However, if the "AutoNegotiate Link
Parameters" box is checked these parameters are automatically
determined and the configuration options greyed out. For most
Gigabit Ethernet devices it is recommended to use Auto-
Negotiation to set the link parameters.
3-4
T N
ESTING THE ETWORK
C
ARD