Using An Accessory Rf Modulator - Philips DVP5980 User Manual

dvp5980MKll_05_eng.indd 11 dvp5980MKll_05_eng.indd 11
Downloaded From Disc-Player.com Philips Manuals
HDMI OUT
IMPORTANT!
– If your television only has a single
Antenna In socket (or labeled as
75 ohm or RF In,) you will need an
RF modulator in order to view the
DVD playback on the television. See
your electronics retailer or contact
Philips for details on RF modulator
availability and operations.

Using an accessory RF modulator

A
Use the composite video cable (yellow)
to connect the DVD player's
VIDEO OUT (CVBS) socket to the
video input socket on the RF modulator.
B
Use the RF coaxial cable (not supplied) to
connect ANTENNA OUT or TO TV
socket on the RF modulator to the
ANTENNA IN socket on the television.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
Connections
RF coaxial cable to TV ANT IN
2
Back of RF Modulator (example only)
ANT IN TO TV VIDEO AUDIO IN
IN
R L
CH3 CH4
1
4 3
DIGITAL
VIDEO OUT
OUT
COAXIAL AUDIO OUT
COMPONENT VIDEO OUT
C
To hear sound of this DVD player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT
(L/R) sockets of the DVD player to the
corresponding AUDIO IN sockets on the
RF modulator (cable not supplied).
D
Connect the Antenna or Cable TV
service signal to the ANTENNA IN or
RF IN socket on the RF modulator. (It
may have been connected to your TV
previously. Disconnect it from the TV).
(continued)
ANT IN
11
2007-08-20 5:53:39 PM 2007-08-20 5:53:39 PM