Twister Storm 3DX Assembly & Flight Training Manual

Advertisement

Quick Links

twiSter Storm 3DX
TWISTER
R/C
Factory-assembled Storm 3DX helicopter with 2.4GHz 6 channel 8-model memory radio*,
brushless motor, ESC, lipo, charger, power supply, heading lock gyro and MORE!
SpecificationS
Main rotor diameter.............................................. 720mm
Tail rotor diameter ................................................. 135mm
Length ..................................................................... 630mm
Weight (not incl. receiver & battery) .......500g (17.5oz)
contentS
1..................................................... Assembled helicopter
1....... Twister 2.4GHz 6 Ch. computer radio - installed*
1.....................Planet R6M 2.4GHz receiver - installed*
1.........................Twister HL400 tail lock gyro - installed
4..........................................EnErg S7.5 servos - installed
1........... Cyclone 440 Turbo brushless motor - installed
1................ Twister 25 amp speed controller - installed
1.................Twister 11.1V lithium polymer battery pack
1............... Twister lithium polymer 12V DC/DC charger
1.................................Twister 240V mains power supply
1.........................................................Foam blade retainer
8................................................AA size pencell batteries
1.........................Twister Storm 3DX instruction manual
the
electric 400 claSS 3D aerobatic rtf heli
the profeSSional 3D helicopter
Assembly & Flight Training guide
the profeSSional choice
for 3D aerobaticS!
profeSSional
ultimate
featureS
■ Test-Flown & Flight-Guaranteed!
■ CCPM 120° flight control system for precise control
■ 3D flight performance without upgrading
■ High performance, low current, brushless motor
■ Digital proportional Twister R/C 2.4GHz transmitter
with silky smooth sticks*
■ High quality ball bearings
■ Planet R6M 6-channel receiver installed*
■ High performance, low friction belt tail drive
■ Professional HL 400 tail lock & std dual rate gyro
■ Autorotation freewheel fitted
■ Professional digital servos installed
■ Strudy 2-part main frame design
Thrust & ball raced main blade grips
Ball raced tail pitch slider
Twin ball raced tail pitch bell crank
Twin boom support kit fitted.
*Twister Storm 3DX is available in two versions.
This item is not included in the 'Radio Ready' version.
choice for
3D flight!
V7.10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Storm 3DX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Twister Storm 3DX

  • Page 1 400 claSS 3D aerobatic rtf heli the profeSSional 3D helicopter Assembly & Flight Training guide TWISTER Factory-assembled Storm 3DX helicopter with 2.4GHz 6 channel 8-model memory radio*, brushless motor, ESC, lipo, charger, power supply, heading lock gyro and MORE! the profeSSional choice for 3D aerobaticS!
  • Page 2: Table Of Contents

    Preparing for flight ........2 supplier and/or an experienced R/C helicopter pilot. 1. Unpack your Twister Storm 3DX ..2 ☛ Read all instructions carefully prior to assembling Battery & charger .......... 2 and before flying the helicopter.
  • Page 3: Introduction

    Twister 3D and without the need for upgrades. Storm. The Twister Storm 3DX’s state of the art 120 degree CCPM control system ensures precise control. This Safety Information control system combined with precision wooden...
  • Page 4: Preparing For Flight

    Insert 8 AA batteries into the transmitter  battery compartment being careful to observe battery polarity, (refer to the Twister RC radio instructions). battery & charger The "CHARGE" LED will glow solid red and ...
  • Page 5: Lithium Polymer Battery Safety

    7. Switch on tranSmitter Do not place battery near fires or any high  If you have purchased the Twister Storm 3DX with 6 temperature object or device. channel radio included please follow the instruction Do not charge batteries whilst driving.
  • Page 6: Range Check

     8. range check begin to rotate slowly and then throttle back. Check that the controls operate without any  Your Twister Storm 3DX is now ready for  interference at a minimum distance of 50 flight. metres. aDVanceD flying featureS N.B If you fly further than 50 metres away you...
  • Page 7: Troubleshooting

    TWISTER troubleShooting main rotor DoeS not turn  Solution 1 – Check throttle stick and trim lever Vibration are both fully down when turning on the helicopter.  Solution 1 – Out of balance main blades  Solution 2 – Check all electrical connections.
  • Page 8: Spares And Option Parts

    TWISTER SpareS anD option partS eXploDeD Diagram http://www.jperkinsdistribution.co.uk...
  • Page 9 TWISTER http://www.jperkinsdistribution.co.uk...
  • Page 10: Exploded Drawing Ref No's

    TWISTER eXploDeD Drawing ref no'S JP Numbers JP Numbers JP Numbers 6602386 6602426 6602422 6602428 6602340 6602300 6602444 (Std 10T) (9T) (11T) 6602300 6602412 6602442 6602310 6602412 6602154 6602394 6602342 6602356 6602394 6602440 6602356 6602362 6602440 6602368 6602394 6602440 6602314...
  • Page 11: Spare Parts Listing

    TWISTER 3D STORM 11.1V 1800mAh LIPO TWISTER 3D STORM LIPO BALANCING BATTERY CHARGER 6600332 6600333 6600338 TWISTER 3D STORM AC POWER SUPPLY (UK) TWISTER 3D STORM AC POWER SUPPLY (EU) TWISTER 3D STORM CYCLONE 440T BRUSHLESS MOTOR 6600342 6600360 6600447 TWISTER 3D STORM ELECTRONIC SPEED TWISTER/EnErG 6.0-7.5G SERVO ARM (4)
  • Page 12 TWISTER 3D STORM LINKAGE RODS (9) 4x7.1mm (4) 6602334 6602336 6602338 TWISTER 3D STORM FLYBAR LINKS TWISTER 3D STORM BALL LINK END (20) TWISTER 3D STORM HORIZONTAL FIN MOUNTING SET 6602344 6602340 6602342 TWISTER 3D STORM TAIL DRIVE BELT PULLEY...
  • Page 13 SHAFT (2) 6602354 6602356 6602358 TWISTER 3D STORM TAIL PITCH CONTROL TWISTER 3D STORM MOTOR MOUNT SET TWISTER 3D STORM TAIL ROTOR GRIP SET 6602360 6602362 6602366 TWISTER 3D STORM TAIL ROTOR HUB TWISTER BEARING (2x5x2.5)(2) TAIL BELT TWISTER 3D STORM LANDING SKIDS &...
  • Page 14 WASHER (4&2) BOLTS & NUTS 6602410 6602412 6602414 TWISTER 3D STORM T/ROTOR SLIDE RING TWISTER 3D STORM TAIL ROTOR OUTPUT TWISTER 3D STORM MAIN TAIL DRIVE GEAR ASSEMBLY SHAFT (2) 6602416 6602420 6602424 TWISTER 3D STORM AUTOROTATION TWISTER 3D STORM SWASHPLATE...
  • Page 15: Option Parts

    Description A. 6600520 TWISTER STORM CNC TAIL GEARBOX B. 6600521 TWISTER STORM CNC SWASHPLATE SET C. 6600522 TWISTER STORM CNC MAIN ROTOR HUB SET D. 6600523 TWISTER STORM CNC TAIL PITCH BELLCRANK E. 6600524 TWISTER STORM CNC T/R PITCH SLIDER F.
  • Page 16 Storm 3DX electric 400 claSS 3D aerobatic rtf heli the profeSSional 3D helicopter Factory-assembled Storm 3DX helicopter with 2.4GHz 6 channel 8-model memory radio*, brushless motor, ESC, lipo, charger, power supply, heading lock gyro and MORE! the profeSSional choice...

Table of Contents