Advertisement
®
PROFESSIONAL AUDIO & SOUND
BELT-PACK TRANSMITTER (MW163U)
M W 1 6
3 U
INSTALLATION OF BATTERIES
MW163U uses one 9V battery, To install or remove the battery , press the
release button at the side edge of transmitter to open or close the cover as in
(Fig.2) To switch on the unit, put the switch to "ON" position. The red LED
indicator will light briefly indicating that battery is fresh. When the RED LED
light is steady, it indicates that battery is weak, and that a replacement is
necessary.
MW163U
MW163U
Fig.2
®
PROFESSIONAL AUDIO & SOUND
9
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING
BEFORE OPERATING THE RDU216 W/MW165U or MW163U, BE
SURE YOU FULLY UNDERSTAND ALL INSTRUCTIONS AND
FEATURES OF THE UNIT.
1)
Read these instructions carefully.
2)
Keep these instructions.
3)
Heed all warnings.
4)
Follow all instructions.
5)
DO NOT use this apparatus near water.
6)
Clean ONLY with a damp cloth.
7)
DO NOT block any of the ventilation openings. Install in
accordance with the instructions provided.
8)
DO NOT install near any heat sources such as radiators,
stoves, or other apparatus that produce heat.
9)
DO NOT mount the RDU216 into a container or a closed
unventilated closet while operating.
11) Use only the attachments and accessories specified in this
manual.
12) Unplug this apparatus during lightning storms or when unused
for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally,
or has been dropped.
14) DO NOT install accessories unless the power cord is removed
from the AC wall outlet and power switch is off.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE
THIS APPLIANCE TO WATER, RAIN OR MOISTURE
2
Advertisement
