Advertisement
®
PROFESSIONAL AUDIO & SOUND
INTRODUCTION
You are the proud owner of a state-of-the-art PLL Synthesized 16 channel
frequency agile UHF high band professional wireless receiver/ transmitter
system. Our engineers have utilized esoteric communications principles and
techniques to design this high quality system that will give unequivocal
performance in all wireless systems applications.
The standard receiver/ transmitter combinations are as follows:
RDU216 / MW163U and RDU216/ MW165U
System classification
Frequency Band
No. Of Channel
Receiver Type
Handheld Transmitter
Beltpack Transmitter
AC Adapter
Size
Standard System Packaging
Receiver
RDU216
Transmitter
MW165U or MW163U
Antenna
ANT 750
AC Adaptor
AC216
Phono Patch Cord
27/216
Frequency Adjust Driver
MRCSD
Operating manual
OM 216
Optional Accessories
Collar microphone for MW163U
Headset microphone w
ith aerobic sweat guard for MW163U
Aerobic waist pouch for MW163U
19" Rack mount with dual antenna mounting plate.
RDU216
UHF
16
True Diversity
MW165U
MW163U
10-15V / 800mA
½ 19"
1 PCS
1 PCS
2 PCS
1 PCS
1 PCS
1 PCS
1 COPY
MC63
MHS63
WP163
PRK216
1
INSTALLATION OF CABLE RESTRAINT
To prevent contact noise caused by constant tension applied to the connector, a cable
restraint is designed such that tension is totally reduced when it is properly used. ( see Fig.7 )
Aerobics
When the audio cable goes through the cable restraint, it will prevent sweat from going
directly into the unit via the connector. This is another advantage of the cable restraint.
INSTALLATION OF LAVALIER / HEADSET
MICROPHONES OR INSTRUMENT INPUTS
Depending on customer requirements, Lavalier / Headset microphone or
instrument inputs can be connected to the transmitter via the audio input
connector. User is free to choose the various input sources but is advised to take
note that connector used must be compatible to each other. The pin
configurations for the mini XLR connector is in Fig.8.
LED INDICATOR
GT IN
2
OFF
ON
3 4
1
POWER
MT IN
GND
ANTENNA
POWER
SWITCH
PHANTOM POWER
Channel Selection and Gain Adjust
Channel selector and gain adjust are hidden in the designated cover in the front as
shown in picture.
To make channel selection and gain adjust, press the designated cover and flip
it open as shown.
Channel selection can be made by
rotating the selector with the frequency
adjust driver. Gain adjust for Lavalier
and Headset microphones can be done
by adjusting the MT switch, whereas
GT switch is for the gain adjust of
electric Guitar and other high impedance
line level inputs.
Fig.7
Fig.8
MW163U
®
PROFESSIONAL AUDIO & SOUND
MT
Channel
MW163U
Selector
GT
10
Advertisement
