mImJ
Custom Function Settings
*: .11
'1
_IIWII
Custom Functions are organized into four groups based on the function
type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Auto focus/Drive, C.Fn
IV: Operation/Others.
---_. - - - - - - - - - - - _ . _ - ,
C.Fn I: Exposure
--,--_._------
C.Fn-1
IiXROBUF.
le".1 increments
,
0: 1/3-stop
1:
1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. Effective when
you prefer to control the exposure in less fine increments than 1/3-stop
increments.
[i]
The exposure level will be displayed in the viewfinder and on the LCD
monitor as shown below.
OC
UC-2 ..1......·.t2
ISO
unl-'
o.
11__,
I. _,
II
"_11_1_'
0: Off
1: On
Enables ISO 6400 and H (equivalent to ISO 12800) to be set.
0.Fn-3
Flas"
Sine. speed ill
IAv
(Apel1ure-prioriW
AE)
motte
0:
Auto
The
fla~h
sync
speed
is
set automatically within a range of 1/200 sec. to
30 sec. to suit the scene's brightness.
1:
1/200-1/60
sec. auto
When flash is used with aperture-priority AE (Av), this prevents a slow
flash-sync speed from being set automatically in low-light conditions.
It is effective for preventing subject blur and camera shake. However,
while the subject will be properly exposed with the flash, the background
will come out dark.
2:
1/200
sec. (fixed)
The flash-sync speed is fixed to 1/200 sec. This more effectively
prevents subject blur and camera shake than with setting 1. However,
the background will come out darker than with setting 1.
184