Configuration1 Menu - Asus SV425 User Manual

SV425 / SV465 / SV555 / SV427 / SV467 / SV557
PIP POP
The resolutions in the PIP and POP modes are configured as
follows:
PIP SIZE {SMALL} : 320 x 240 pixels
{MIDDLE} : 480 x 320 pixels
{LARGE} : 640 x 480 pixels
POP SIZE : 474 x 355 pixels
NOTE: T he images displayed in the sub picture always fit the
PIP sizes shown above irrespective of the aspect ratio
of the input image.

4.2.5. CONFIGURATION1 menu

CONFIGURATION1
OFF TIMER
SCHEDULE
DATE AND TIME
CONFIGURATION1 RESET
PIP
1 1
2
3
:SEL :NEXT
SET
OFF TIMER
Set the display to turn itself off to standby mode within an
amount of time specified.
The options are: {OFF, 1HOUR ~ 24HOURS} from currrent time.
SCHEDULE
This function allows you to program up to 7 (seven) different
scheduled time intervals for the display to activate.
You can select:
• The time for the display to turn on and turn off.
• The days in a week for the display to activate.
• Which input source the display will use for each scheduled
activation period.
NOTE: You should set up current date and time in {DATE AND
TIME} menu before using this function.
1. Press [SET] button to enter the submenu.
SBS ASPECT SBS FULL OFF
OFF
:RETURN :EXIT MENU
EXIT MENU
SCHEDULE
TODAY 2011 . 08 . 04
1
2 ON
3 :
4
5 EVERY DAY
6 WED
7 SAT
+-:SEL
2. Press [ ] or [ ] button to select a schedule item (item
number 1 ~ 7), and then press [SET] button to mark it the
item number.
SCHEDULE
TODAY 2011 . 08 . 04
1
2 ON
3 :
4
5 EVERY DAY
6 WED
7 SAT
+-:SEL
3. Press [ ] or [ ] button to select the schedule:
POWER-ON schedule: Press [
1
the hour and minute for the display to turn on.
POWER-OFF schedule: Press [
2
the hour and minute for the display to turn off.
Select or leave an empty "__" for both the hour and minute
slot if you do not want to use this power-on or power-off
schedule.
INPUT-SOURCE selection: Press [
3
select an input source. If no input source is selected,
the input source will remain the same as last selected.
DATE schedule: Press [ ] button to select which day
4
in a week this schedule item will be take effect, and
then press the [SET] button.
4. For more schedule settings, press [EXIT] button and then
repeat the steps above. A check mark in the box next to
the number of the schedule item indicates that the selected
schedule is in effect.
NOTES:
• The {EVERY DAY} selection in a schedule item takes priority
over the other weekly schedules.
• If the schedule overlap, the scheduled power-on time takes
priority over scheduled power-off time.
• If there are two schedule items programmed for the same
time, the highest numbered schedule takes priority. For
example, if schedule items #1 and #2 both set the display to
power on at 7:00 AM and off at 5:00 PM, then only schedule
item # 1 will take effect.
16
THU 20 : 19 : 55
OFF INPUT
:
MON TUE
THU FRI
SUN EVERY WEEK
:RETURN :EXIT MENU
EXIT MENU
THU 20 : 19 : 55
1 2
OFF INPUT
:
MON TUE
THU FRI
SUN EVERY WEEK
:RETURN :EXIT MENU
EXIT MENU
] or [ ] button to set
] or [
] or [
3
4
] button to set
] button to