Remote Control; General Functions - Asus SV425 User Manual

SV425 / SV465 / SV555 / SV427 / SV467 / SV557
2.3.

Remote Control

2.3.1. General functions

POWER
1
SMART
2
3
ON/OFF
4
CONTRAST
5
DISPLAY
6
7
8
AUTO
ADJUST
MUTE
9
[POWER] button
1
Press to switch on the display from standby mode. Press
again to turn it off and back into standby mode.
[SMART] button
2
Press to activate Smart Menu. Press [
select menu options. Press [SET] button to confirm and exit
the selection.
• Standard: Used for normal images (factory setting)
• Highbright: Used for moving image such as Video
• sRGB: Used for text based images
[PIP] (Picture In Picture) button
3
[ON/OFF]: Turn PIP mode ON/OFF.
[INPUT]: Select the input signal for the sub-picture.
[CHANGE]: Toggle between the main picture and sub
picture.
[CONTRAST] button
4
Press to activate Contrast Menu. Press [ ] or [ ] button to
adjust the value. Press [MENU] button to confirm and exit.
10
VIDEO AUDIO
SOURCE SOURCE
11
12
PIP
INPUT CHANGE
13
BRIGHTNESS
14
15
MENU
16
SET
17
EXIT
18
VOL UP
19
20
VOL DOWN
] or [ ] button to
[DISPLAY] button
5
Press to turn on/off the information OSD displayed on the
upper right corner of the screen.
[ ] button
6
• Press to move the selection left in OSD menu.
• Press to decrease the value in OSD menu.
• Press to move the sub-picture left in PIP mode.
[SET] button
7
Press to activate the setting inside the OSD menu.
[AUTO ADJUST] button
8
Press to run the Auto Adjust function.
NOTE: This button is functional for VGA input only.
[MUTE] button
9
Press to turn the mute function on/off.
[VIDEO SOURCE] button
10
Press to toggle Video Source Menu. Press [
to select one of the video sources among Displayport,
DVI-D, VGA, HDMI, Component, Video, or Card OPS.
Press [SET] button to confirm and exit.
[AUDIO SOURCE] button
11
Press to toggle Audio Source Menu. Press [
to select one of the audio sources among Displayport,
HDMI, Audio1, Audio2, or Card OPS. Press [SET] button
to confirm and exit.
Picture Format button
12
Press to switch screen aspect ratio.
• For PC signal: FULL, NORMAL, CUSTOM, and REAL.
• For Video signal: FULL, NORMAL, DYNAMIC,
CUSTOM, REAL, and 21:9.
[BRIGHTNESS] button
13
Press to toggle Brightness Menu. Press [ ] or [ ] button to
adjust the value. Press [MENU] button to confirm and exit.
[ ] button
14
• Press to move the selection up in OSD menu.
• Press to move the sub-picture up in PIP mode.
[MENU] button
15
Press to turn the OSD menu on/off.
[ ] button
16
• Press to move the selection right in OSD menu.
• Press to increase the value in OSD menu.
• Press to move the sub-picture right in PIP mode.
[EXIT] button
17
Press to turn back to the previous OSD menu.
[ ] button
18
• Press to move the selection down in OSD menu.
• Press to move the sub-picture down in PIP mode.
[VOL UP] button
19
Press to increase the audio output level.
[VOL DOWN] button
20
Press to decrease the audio output level..
6
] or [ ] button
] or [ ] button