Cadillac DeVille 2005 Owner's Manual page 89

Canadian Owners: If you lose or damage your keys,
only a GM dealer can service PASS-Key
have new keys made. To program additional keys you
will require two current driver's keys (black in color).
You must add a step to the following procedure.
After Step 2, repeat Steps 1 and 2 with the second
current driver's key. Then continue with Step 3.
To program the new key do the following:
1. Verify that the new key has PK3 stamped on it.
2. Insert the current driver's key in the ignition
and start the engine. If the engine will not start see
your dealer for service.
3. After the engine has started, turn the key to OFF,
and remove the key.
4. Insert the key to be programmed and turn it to ON
within 10 seconds of removing the previous key.
5. The SECURITY light will turn off once the key has
been programmed. It may not be apparent that the
SECURITY light went on due to how quickly the
key is programmed.
6. Repeat the Steps 1 through 4 if additional keys are
to be programmed.
If you are ever driving and the SECURITY light comes
®
III to on and stays on, you will be able to restart your
engine if you turn it off. Your PASS- Key
however, is not working properly and must be serviced
by your dealer. Your vehicle is not protected by the
PASS-Key
If you lose or damage a PASS-Key
your dealer to have a new key made.
In an emergency, contact Cadillac Roadside Assistance.
See Roadside Service on page 7-5.
®
III system at this time.
®
III system,
®
III key, contact
2-23