Picture Menu Contents; Advanced Settings - Digiturk 42PF5040 Operating Instructions Manual

For your viewing requirements, you can set the related mode option. Picture mode
Mode
can be set to one of these options: Cinema,Game,Dynamic and Natural.
Contrast Sets the lightness and darkness values of the screen.
Brightness Sets the brightness value for the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colors.
To set Power Save Mode as Eco, Picture Off and Disabled. See the section,
Power Save
"Environmental Information" in this manual for further information on Power
Mode
Save Mode.
This setting controls the backlight level and it can be set to Auto, Maximum,
Backlight Minimum and Eco Mode. Backlight function will be inactive if Power Save
(optional) Mode is set to On. Backlight cannot be activated in VGA, Media Browser mode
or while the picture mode is set to Game.
If the broadcast signal is weak and the picture is noisy, use Noise Reduction
Noise
setting to reduce the noise amount. Noise Reduction can be set to one of these
Reduction
options: Low, Medium, High or Off.
Dynamic You can change contrast rate by using dynamic contrast function. Dynamic
Contrast contrast can be set to one of these options: Low, Medium, High or Off.
Colour Temp Sets the desired colour tone.
Picture Zoom Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom, 4:3 or Cinema.
HDMI True
While watching from HDMI source, this feature will be visible in the Picture
Black(optional) Settings menu. You can use this feature to enhance blackness in the picture.
Films are recorded at a different number of frames per second to normal television
Film Mode
programmes. Turn this feature on when you are watching films to see the fast
(optional)
motion scenes clearly.
Skin Tone Adjust the desired skin tone.
Colour Shift Adjust the desired colour tone.
Press OK button to edit RGB gain. You can configure the colour temperature
RGB Gain
values using the RGB Gain feature.
Reset Resets the picture settings to factory default settings
While Mode option is highlighted in picture menu, Pixellence demo mode will
be displayed bottom of the menu screen.
Pixellence Demo Mode function optimizes the TV's video settings and helps to
acquire a better image quality. Pixellence Demo Mode thus includes
Pixellence
contrast, sharpness, colour enhancement and skin tone correction along with
Demo Mode
the skin tone detection.
Press OK to start Pixellence Demo Mode for experiencing Pixellence quality.
Throughout the demo mode, the screen is splitted into two sections, one
displaying the Pixellence II active area; the other displaying the normal broadcast.
Press OK button to quit the demo mode.

Picture Menu Contents

Advanced Settings

English - 31 -