Service Adjustment; Adjustment Items - JVC AV-14F71/VT Service Manual

SERVICE ADJUSTMENT

BEFORE STARTING SERVICE ADJUSTMENT
1. There are 2 way of adjusting this TV:
REMOTE CONTROL UNIT and the other is the conventional
method using adjustment parts and components.
2. The adjustment with the REMOTE CONTROL UNIT is made
on the basis of the initial setting values. The setting values
which adjust the screen to its optimum condition may differ
from the initial setting values.
3. Make sure that connection is correctly made to AC power
source.
4. Turn on the power of the set and equipment before use, and
start the adjustment procedures after waiting at least 30 minutes.
5. Unless otherwise specified, prepare the most suitable reception
or input signal for adjustment.
MEASURING INSTRUMENT AND FIXTURES
1. DC voltmeter (or digital voltmeter)
2. Oscilloscope
3. Signal generator (Pattern generator) [PAL / SECAM / NTSC]
4. Remote control unit

ADJUSTMENT ITEMS

Adjustment item
B1 POWER SUPPLY
FOCUS adjustment
IF circuit adjustment
V/C (Video / Chroma) circuit adjustment
One is with the 6. Never touch any adjustment parts, which are not specified
7. Preparation for adjustment
Adjustment item
DEFLECTION circuit adjustment
VSM PRESET setting
PURITY/ CONVERGENCE adjustment
No. 51918
in the list for this adjustment VRs, transforms, condensers,
etc.
Unless otherwise specified in the adjustment instructions, preset
the following functions with the REMOTE CONTROL UNIT.
User mode position
PICTURE MODE (VSM)
VNR
TINT / COLOUR / BRIGHT
CONT. / SHARP
BLUE BACK
OFF TIMER
ECO SENSOR
AUTO SHUT OFF
AV-14F71
BRIGHT
OFF
CENTER
OFF
OFF
OFF
OFF
13