Operating The Appliance; Preparing The Washing Machine; Select Programme/Switch On The Appliance; Change The Programme Default Settings - Bosch WAE24461GB Instruction Manual And Installation Instructions

Operating the appliance

en
1
Operating the
appliance
i n g O p e r a t
Preparing the washing
machine
The washing machine must be
Note:
correctly installed and connected
(from ~ Page 32).
Connect the mains plug.
1.
Turn on the water tap.
2.
Open the washing machine door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
Select programme/switch on
the appliance
If you have activated the
Note:
childproof lock, you must first deactivate
it before you can set a programme.
~ Page 20
Use the programme selector to select
the required programme. Can be turned
in both directions.
The machine is switched on.
The following appears in the display
panel:
The programme duration,
■
The preset temperature,
■
The preset spin speed.
■
18
t h e
Change the programme
default settings
You can use the default settings or
a n c e a p p l i
change them.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
All buttons are sensitive and only
Note:
need to be touched lightly. If the buttons
are held for longer, the appliance
automatically runs through the setting
options.
The settings are activated without
needing to be confirmed.
They are not saved when the appliance
is switched off.
Programme default settings
~ Page 16
Overview of programmes from
~ Page 13

Select additional programme

settings

By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the
programme progress.
The indicator lamp for the button lights
up if a setting is active.
The settings are not saved when the
appliance is switched off.
Additional settings ~ Page 17
Overview of programmes from
~ Page 13