1. Manuals
  2. Brands
  3. Possl Manuals
  4. Motorhomes
  5. D-Line 2011
  6. Instruction manual

Possl D-Line 2011 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Instruction manual
Congratulations
Instruction manual
We congratulate you on your new motorhome and would like to thank you for choosing a quality product from
PÖSSL.
With a motorhome from PÖSSL you always have the right travelling companion for every trip: Whether for a
city trip, a short excursion or your family holidays. The innovative and well-planned layouts offer a wide range
of possibilities and the modern interior design, which is common to all models, immediately convey a homely
flair. The high quality standard and the large variability furthermore enthrall - lack of space is a thing of the past
in our vehicles. Many useful details prove to be extremely practical when on the road making your holiday even
more relaxed.
Each PÖSSL vehicle is manufactured with great care and the quality is closely checked. This ensures that our
products have a long service life.
This instruction manual deals primarily with the aspect of living in your motorhome. It will give you all important
information and tips so that you can enjoy all technical advantages of your motorhome to the full. We have also
included a chapter on maintenance - and thus on the conservation of value.
In addition, you will find the documents on the base vehicle and the various built-in appliances.
For maintenance work or whenever you need some help, please always get in touch with your PÖSSL dealer.
They know your caravan best of all and will meet all your requests fast and reliably.
We wish you a lot of fun with your motorhome, a relaxing holiday and safe driving at all times.
© 2011 Pössl Freizeit und Sport GmbH, Ainring
Motorhome - 02/11-0 - PSL-MJ11-00EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D-Line 2011 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Possl D-Line 2011

Summary of Contents for Possl D-Line 2011

  • Page 1 Instruction manual Congratulations Instruction manual We congratulate you on your new motorhome and would like to thank you for choosing a quality product from PÖSSL. With a motorhome from PÖSSL you always have the right travelling companion for every trip: Whether for a city trip, a short excursion or your family holidays.
  • Page 2 Instruction manual Motorhome - 02/11-0 - PSL-MJ11-00EN...

  • Page 3: Table Of Contents

    Contents Records Living ..... . . 5 ......33 Vehicle document .
  • Page 4 Contents Electrical system Care ... . . 67 ......99 General safety instructions .

  • Page 5: Records

    Records Vehicle document 1Records Vehicle data Model: Car manufacturer/type of engine: Serial number: Initial registration: Purchased from company: Key number: Chassis number: Customer address Surname, Christian name: Street, no.: Postal code, town: E-mail: Dealer's stamp and signature We reserve the right to alter the construction, equipment and the scope of delivery.

  • Page 6: Inspection Records

    Records Inspection records Delivery Date: Signature and stamp of the PÖSSL dealer: 1th year Date: Signature and stamp of the PÖSSL dealer: No defects found Found defects: Should it be determined during an inspection that additional work is necessary, then the carrying out of this work is dependent on the customer commissioning this to be done.

  • Page 7: Inspection Plan

    Records Inspection plan Pos. Component Activity Interval Joints, hinges Lubricate Annually Refrigerator, heater, boiler, Function check Annually cooker, lighting, storage flap and door closures, toilet, seat belts Windows, skylights Function check, water Annually ingress test Upholstery, curtains, blinds Visual check Annually Sealing strips, edges, -rubber Check for damage...
  • Page 8 Records Motorhome - 02/11-0 - PSL-MJ11-00EN...

  • Page 9: Introduction

    Introduction Please read this instruction manual completely before 2Introduction using the vehicle for the first time! Always keep this instruction manual in the vehicle. Also inform all other users of the safety regulations. The non-observance of this symbol can lead to personal injury. The non-observance of this symbol can lead to damage being caused to, or inside the vehicle.

  • Page 10: General

    Introduction General The vehicle is constructed in accordance with the latest technology and the recognised safety regulations. Nevertheless, personal injury may result and the vehicle may be damaged if the safety instructions in this instruction manual are not followed. Depending on the configuration, the first-aid kit and hazard warning triangle are not included as standard.
  • Page 11 Introduction When parked, do not allow the engine to run more than necessary. When running idle, a cold engine releases more contaminants than usual. The running temperature of the engine is achieved more quickly whilst the vehicle is in motion. Use an environmentally-friendly WC chemical agent for the WC which can also be biologically degraded and only use small doses.
  • Page 12 Introduction Motorhome - 02/11-0 - PSL-MJ11-00EN...

  • Page 13: Safety

    Safety Fire prevention 3Safety 3.1.1 Avoidance of fire risks Never leave children in the vehicle unattended. Keep flammable materials clear of heating and cooking appliances. Lights can get very hot. WHen the light is switched on, a safety distance of 30 cm to combustible material has to be maintained. Fire hazard! Never use portable heating or cooking appliances.

  • Page 14: Road Safety

    Safety As far as the fitted appliances (heater, cooker, refrigerator, etc.) and the base vehicle (engine, brakes, etc.) are concerned, the instruction manuals are authoritative. It is imperative that they be observed. Fitting accessories or special equipment can alter the dimensions, weight and road behaviour of the vehicle.

  • Page 15: Towing

    Safety Observe the overall height of the vehicle (including roof loads) at under- passes, tunnels, etc. In winter, the roof must be free of snow and ice before commencing the journey. Before commencing the journey, distribute the vehicle payload evenly (see Chapter 4).
  • Page 16 Safety Have the defect in the gas system repaired by an authorised specialist workshop. Open a skylight or a window before taking open sources of combustion (gas cooker) into service. Do not use the gas cooker or gas oven for heating purposes. If the vehicle or gas devices are not used, close the regulator tap on the gas bottle.

  • Page 17: Gas Bottles

    Safety 3.5.2 Gas bottles Gas bottles are only to be transported within the designated gas bottle compartment. Place gas bottles vertically in the gas bottle compartment. Tie down gas bottles so that they are unable to turn or tilt. If the gas bottles are not connected to the gas tube, always place the protective cap on top.
  • Page 18 Safety Motorhome - 02/11-0 - PSL-MJ11-00EN...

  • Page 19: Before The Journey

    Before the journey Payload 4Before the journey Excessive payload and the wrong tyre pressure can cause the tyre to burst. You can lose control of the vehicle. Adapt your speed to the payload. The stopping distance is longer when the payload is higher. The maximum permissible gross weight stated in the vehicle documents is not to be exceeded by the payload.

  • Page 20: Calculating The Payload

    Before the journey Additional equipment Additional equipment includes accessories and special equipment. Examples of additional equipment include: Tow coupling Roof racks Awning Bike or motorcycle rack Satellite unit Information about the weights of the various special equipment devices can be obtained from the manufacturer.

  • Page 21: Loading The Vehicle Correctly

    Before the journey Mass in kg to be Calculation calculated Example for calculating Maximum permissible gross weight ac- 3300 cording to vehicle documents, Field F.1 the payload Vehicle mass in a ready-to-drive condi- - 2720 tion, including basic equipment according to vehicle documents, Field G This results in a permissible payload Conventional load, e.g.

  • Page 22: Entrance Step

    Before the journey Entrance step Before starting the journey and also after short breaks check whether the entrance step has been retracted completely. Do not stand in the direct range of movement of the entrance step while the entrance step is being extended or retracted. Do not step on the entrance step until it has extended completely.

  • Page 23: Road Safety

    Before the journey Road safety Check the tyre pressure before a journey and at 2-week intervals. Wrong tyre pressure causes excessive wear and can lead to damage or even to tyre burst. You can lose control of the vehicle. Before commencing the journey, work through the checklist: Checks Checked Base vehicle...
  • Page 24 Before the journey Checks Checked Gas system Gas bottles firmly fixed in the gas bottle compartment so that they are unable to turn Protective cap set on top of the gas bottle Regulator tap on the gas bottle and gas isolator taps are closed Electrical system Check the battery voltage of the starter battery and the living...

  • Page 25: During The Journey

    During the journey Driving the motorhome 5During the journey The base vehicle is a commercial vehicle (small truck). Adapt your manner of driving correspondingly. Before starting the journey and also after short breaks check whether the entrance step has been retracted completely. Always wear a seat belt during the journey at those seats where a seat belt is mounted.

  • Page 26: Seat Belts

    During the journey Seat belts The vehicle is equipped with automatic three-point seat belts at those seats in the living area for which a seat belt is stipulated by law. The corresponding national regulations apply for using a seat belt. Before starting the journey fasten your seat belt and keep it fastened during the journey.

  • Page 27: Seats (Aguti)

    During the journey 5.4.1 Seats (Aguti) 1 Lengthways adjustment 2 Armrest adjustment 3 Rotating 4 Backrest adjustment Fig. 2 Driver's and front passenger's seats (Aguti) Rotating seats into The seats can be rotated in any direction. The seats can only be locked in posi- driving position tion in the direction of travel.

  • Page 28: Seats (Isri)

    During the journey Adjusting the seat height Depending on the model, the height of the seat is infinitely adjustable. Fig. 3 Seat height adjustment Pull the lever (Fig. 3,1) upwards. Take pressure off or apply pressure to seat. The seat moves up or down. Release lever when the desired position is reached.

  • Page 29: Seating Arrangement

    During the journey Adjusting an appropriate Both the height and the position of the driver's and front passenger's seats can seating position be adjusted. The handles which are required for this purpose are positioned to the front, right or left of the seat. The backrest is under strong spring tension.

  • Page 30: Filling Up With Diesel

    During the journey Filling up with diesel No appliance (e.g. heating or refrigerator) that is operated through the built-in burner may be operational while fuel is being filled up, on ferries or in the garage. Danger of explosion! Refer to the instruction manual for the base vehicle for the position of the fuel filler neck.

  • Page 31: Pitching The Motorhome

    Pitching the motorhome Handbrake 6Pitching the motorhome Firmly apply the handbrake when parking the vehicle. An applied handbrake can prevent the driver's seat from turning. If neces- sary release the handbrake briefly. Entrance step In order to exit the vehicle, first fully extend the entrance step. 230 V connection The vehicle can be connected to a 230 V power supply (see Chapter 9).
  • Page 32 Pitching the motorhome Motorhome - 02/11-0 - PSL-MJ11-00EN...

  • Page 33: Living

    Living External flaps 7Living Before commencing the journey, close all external flaps and lock them. When leaving the vehicle, close all external flaps. The external flaps fitted to the vehicle are all fitted with identical locking cylin- ders. Therefore, all locks can be opened with a single key. 7.1.1 Flap for 230 V connection, square 1 External flap...

  • Page 34: External Flap Thetford Cassette

    Living 7.1.2 External flap Thetford cassette Do not let the external flap fall closed in order to avoid damage. Fig. 7 External flap Thetford cassette Fig. 8 External flap Thetford cassette 2 Opening: Insert the key into the locking cylinder of the push-button lock (Fig. 7,1) and turn a quarter turn.

  • Page 35: Ventilation

    Living Closing: Insert the cap in the fresh water filler neck. Turn key clockwise. Remove the key. Ventilation The oxygen in the vehicle interior is used up by breathing and the use of gas operated appliances. That is why the oxygen needs to be replaced on a constant basis.

  • Page 36: Hinged Window With Rotary Hinges

    Living When leaving the vehicle, always close the windows. In case of strong temperature differences or in extreme weather conditions, light condensation can form on the double-glazed acrylic glass. The glass is designed in such a way that condensation can evaporate when the external temperature increases.
  • Page 37 Living Fig. 12 Catch lever in the "continuous ventilation" position Continuous ventilation With the catch lever, the hinged window can be placed in two positions: "Continuous ventilation" (Fig. 12) "Firmly closed" (Fig. 10) To place the hinged window into the "continuous ventilation" position: Turn the catch lever (Fig.

  • Page 38: Hinged Window With Automatic Hinges

    Living 7.3.2 Hinged window with automatic hinges Open the window completely in order to unblock the locking device. If the locking device is not unblocked and the window is closed nevertheless, there is the danger of the window being torn due to the massive counter- pressure.

  • Page 39: Sliding Window Without Lock

    Living To place the hinged window into the "continuous ventilation" position: Turn the catch lever (Fig. 15,3) a quarter turn towards the centre of the window. Lightly open the hinged window outwards. Turn the catch lever a quarter turn towards the window frame. The locking catch (Fig.

  • Page 40: Blind And Roller Insect Screen

    Living 7.3.4 Blind and roller insect screen The windows are fitted with a blind and a roller insect screen. The blind and insect screen can be adjusted separately. Fig. 17 Hinged window Blind Closing: Grip into the notch (Fig. 17,2) and pull the blind from the top downwards as far as wished.

  • Page 41: Blind For The Windscreen

    Living 7.3.6 Blind for the windscreen Fig. 20 Blind for the windscreen Closing: Fold down the sun visors. Pull the blind (Fig. 20,2) upwards and hook into the sun visors using the hooks (Fig. 20,1). Opening: Release the blind (Fig. 20,2) from the sun visor. Fold the sun visors upwards.

  • Page 42: Skylight With Snap Latch

    Living 7.4.1 Skylight with snap latch The skylight can be pushed upwards either from one side or from both sides. Fig. 21 Skylight with snap latch Opening: Pull down the insect screen (Fig. 21,2) with the handle (Fig. 21,1). The insect screen folds down.
  • Page 43 Living Closing: Use both hands to push the bar (Fig. 23,1) slightly upwards. Push the bar back in the guides. Push the bar upwards with both hands until it is above the safety knob (Fig. 22,2). Fig. 24 Hinged skylight in ventilation Fig.

  • Page 44: Wind-Up Skylight

    Living 7.4.3 Wind-up skylight Fig. 26 Wind-up skylight The wind-up skylight can be opened using the manual crank. Opening: Rotate the hand crank (Fig. 26,2) until a resistance can be felt (max. opening angle 70°). Closing: Rotate the hand crank until the wind-up skylight is closed. The wind-up sky- light can be locked after rotating two or three more times.

  • Page 45: Multifunction Skylight

    Living 7.4.4 Multifunction skylight Do not stand on the acrylic glass of the multifunction skylight. Before commencing the journey, check that the multifunction skylight is closed and locked. The multifunction skylight is not to be opened or closed during the journey. The multifunction skylight may only be handled with both hands on the grips.

  • Page 46: Rotating The Seats

    Living Roller insect screen To close and open the roller insect screen: Closing: Pull the roller insect screen at the handle (Fig. 27,4) to the opposite handle of the blind (Fig. 27,1) and allow to engage. Opening: Hold the roller insect screen at the handle (Fig. 28,2) and press the unlocking bar (Fig.

  • Page 47: Bench Seat

    Living Bench seat Fig. 32 Bench seat Bench seat extension The bench seat can be extended if required. Increasing the seating area Do not pull at the cover (Fig. 32,1). Pull out the extension at the handle (Fig. 32,2) under the cover. Storage space An additional storage space is located under the bench seat.

  • Page 48: Suspension Table With Dismantable

    Living Attach suspension table to the lower attachment rail (Fig. 33,1) and rest it onto the table leg hinge (Fig. 33,3). Lock the table-top. 7.7.2 Suspension table with dismantable support leg Variant 1 Fig. 35 Suspension table with disman- Fig. 36 Bed extension (extra bed) table support leg The table size can be enlarged by swiveling out a table-top extension.
  • Page 49 Living Variant 2 Fig. 37 Suspension table Fig. 38 Back cushion frame The table size can be enlarged by inserting a table-top extension. Extending: Turn open the locking screws (Fig. 37,4) and pull the table forwards. Insert the table-top extension and tighten the locking screws (Fig. 37,4). Reducing size: Remove the table-top extension and store it.

  • Page 50: Fixed Table Of The Rear Seating Group

    Living 7.7.3 Fixed table of the rear seating group Fig. 39 Fixed table of the rear seating group The table-top of the fixed table of the rear seating group can be moved length- ways. Shift the table-top: Undo the knurled screw (Fig. 39,6). Move the table-top (Fig.

  • Page 51: Swivel Table

    Living 7.7.4 Swivel table The swivel table can be moved on rails or be removed completely. The table- top of the swivel table can be swiveled into different positions. Fig. 40 Swivel table Fig. 41 Table frame holder Install the swivel table: Place the table frame in the holder (Fig.

  • Page 52: Folding Table

    Living 7.7.5 Folding table Fig. 42 Folding table, folded in Fig. 43 Folding table, table leg holder The folding table can be used as a table or as an additional storage space out- side the vehicle. When the side door is opened, the folding table can be mounted onto the rear of the kitchen unit.

  • Page 53: Halogen Spotlight (Movable)

    Living 7.8.1 Halogen spotlight (movable) Fig. 44 Spotlight Turning spotlight: Grasp the housing (Fig. 44,2) and turn it. The housing can be turned in different directions: To the left and to the right Up and down Shifting spotlight: Grasp the holder (Fig. 44,1). Push spotlight along the rail system to desired position.

  • Page 54: Lamp In Pop-Up Roof

    Living 7.8.3 Lamp in pop-up roof Fig. 46 Lamp in pop-up roof Fig. 47 Remote control for lamp in pop-up roof Switching on the light: Push the switch (Fig. 46,1) to the left. Switching the light off: Push the switch (Fig. 46,1) to the middle. Switching on and off with Push the switch (Fig.
  • Page 55 Living Dismantling the fixed bed In order to increase the storage compartment space the bed can also be dis- mantled and stored completely. Fig. 48 Dismantling Variant 1 Fig. 49 Dismantling Variant 2 Dismantling Variant 1: The first step of the stairs can be removed additionally in order to create a passage.

  • Page 56: Bed In The Pop-Up Roof

    Living Connecting beds: Lay the middle board between the two beds. Lay the board (Fig. 51,1) onto the braces above the stairs (Fig. 51,2). Insert the additional cushions (Fig. 50,1, 2 and 3). 7.9.2 Bed in the pop-up roof The maximum load for the bed in the pop-up roof amounts to 200 kg. Fold in the pop-up roof before commencing the journey.

  • Page 57: Converting Seating Groups For Sleeping

    Living When the pop-up roof is being folded in: Ensure that the safety guards and the cloth bellows are not clamped in. 7.10 Converting seating groups for sleeping 7.10.1 Seating group rear 1 Back cushion 2 Seat cushion 3 Table 4 Slatted frame 5 Extension at the slatted frame Fig.

  • Page 58: Front Seating Group

    Living 7.10.2 Front seating group 1 Back cushion 2 Seat cushion 3 Table 4 Driver's seat 5 Front passenger's seat Fig. 57 Prior to conversion Fig. 58 After conversion Turn the driver's seat (Fig. 57,4) so that the backrest faces the driver's door.

  • Page 59: Facing Seating Unit With Extension

    Living 7.10.3 Facing seating unit with extension Back cushion Seat cushion Table Bench seat extension Seat cushion Additional cushion Additional cushion Additional cushion Fig. 59 Prior to conversion Fig. 60 During conversion Fig. 61 After conversion Extend the table (Fig. 59,3) and convert it into a bed foundation (see Sec- tion 7.7).

  • Page 60: Front Seating Group With Extension

    Living 7.10.4 Front seating group with extension Back cushion Seat cushion Table Table-top extension Bed extension Additional cushion Driver's seat Fig. 62 Prior to conversion Fig. 63 During conversion (extra bed) Fig. 64 During conversion (spare bed) 3 4 5 6 Fig.

  • Page 61: Gas System

    Gas system General 8Gas system Close all gas isolator taps and the regulator tap before commencing the journey and when leaving the vehicle. Closing of the isolator and regulator valves is not required at vehicles that are equipped with a crash sensor. No appliance (e.g.

  • Page 62: Gas Bottles

    Gas system Due to its function and construction, the gas bottle compartment is a space which is open to the exterior. Never cover or block the standard forced ventilation. Otherwise leaking gas cannot be dispersed to the out- side. Do not use the gas bottle compartment as storage space as it is not moisture-proof.

  • Page 63: Changing Gas Bottles

    Gas system Changing gas bottles When changing gas bottles, do not smoke or create any open fire. When you have changed the gas bottle, check whether gas escapes at the connection points and unions. Use a leakage search spray to spray the relevant connection point or union.

  • Page 64: Hose Break Guard (Crash Sensor)

    Gas system Hose break guard (crash sensor) If the vehicle is equipped with a crash sensor, the living area heater may be operated during the journey. Additionally observe the manufacturer's instruction manual. The crash sensor (Fig. 69) protects against unwanted gas discharge. In the event of an accident or a too high angle of the vehicle the gas supply will auto- matically be interrupted.

  • Page 65: Duocontrol Switching Facility

    Gas system DuoControl switching facility Do not use the switching facility in closed spaces. If the vehicle is equipped with a panel of the DT series and the switching facility is operated via this panel, the operating unit is not required. Additionally observe the manufacturer's instruction manual.
  • Page 66 Gas system Putting into operation: Open the regulator taps on the gas bottles (Fig. 70,1 and 6). Use the knob (Fig. 70,4) on the switching valve (Fig. 70,3) to select the gas bottle which is to be the primary source of gas (primary bottle). Always turn the knob as far as it will go.

  • Page 67: Electrical System

    Electrical system General safety instructions 9Electrical system Only allow qualified personnel to work on the electrical system. All electronic devices (e.g. mobile telephones, radios, televisions or DVD players) which have been retrofitted to the vehicle and are operated during the journey must have specific features: These are the CE certi- fication, the EMC test (electromagnetic compatibility) and the "E1"...
  • Page 68 Electrical system The battery is maintenance-free. Maintenance-free means: It is not necessary to check the acid level. It is not necessary to lubricate the battery poles. It is not necessary to refill the distilled water. Even a maintenance-free battery must be charged regularly. The charging condition of the living area battery can be read off on the panel.

  • Page 69: Transformer/Rectifier (Ebl 99)

    Electrical system Remove the living area battery from the vehicle. Install the new living area battery in the reverse order. Transformer/rectifier (EBL 99) Do not cover the ventilation slots. Danger of overheating! Depending on the model, not all fuse slots are fitted with fuses. Further information can be obtained in the manufacturer's instruction manual.

  • Page 70: Battery Cut-Off Switch

    Electrical system Functions The transformer/rectifier has the following functions: The transformer/rectifier charges the living area battery. The transformer/ rectifier charges the starter battery with a float charge only. The transformer/rectifier monitors the voltage in the living area battery. The transformer/rectifier distributes the current to the 12 V circuits and secures them.

  • Page 71: Battery Monitoring

    Electrical system 9.3.2 Battery monitoring Completely recharge a discharged living area battery as soon as possible. The battery monitoring in the transformer/rectifier monitors the voltage in the living area battery. If the battery voltage falls below 10.5 V, the battery monitor in the transformer/ rectifier switches off all of the 12-V appliances, excluding the safety/drainage valve.

  • Page 72: V/Tank Gauge For Battery Voltage And Water Or Waste Water Levels

    Electrical system 9.4.1 V/tank gauge for battery voltage and water or waste water levels Battery voltage The V/tank gauge is for the indication of the battery voltage of the starter bat- tery or the living area battery. The LEDs of the display V (Fig. 73,3) displays the battery voltage. Displays: Press the upper part of the rocker switch (Fig.

  • Page 73: 12 V Indicator Lamp

    Electrical system When leaving the vehicle switch off the 12 V main switch. This prevents unnecessary discharging of the living area battery. Appliances such as the safety/drainage valve, charger, solar charge regu- lator and panel consume approx. 20 mA to 65 mA of electricity from the battery capacity, even when the 12 V main switch is turned off.

  • Page 74: Fuses

    Electrical system Connecting the power Open the external flap. cable: Depending on the model, fold up the cover. Plug in the plug: Depending on the model, unlock the plug before pulling it out. Fuses Only replace defective fuses when the cause of the defect is known and has been remedied.
  • Page 75 Electrical system Before changing fuses, take the function, value and colour of the relevant fuses from the following specifications. When changing fuses, only use flat fuses with the values shown below. Fuses on the starter Depending on the model the fuses are installed near the starter battery under battery a covering between the seats or in a seat console.

  • Page 76: Fuse

    Electrical system Function Value/colour Fuses at the Internal charger module 20 A yellow transformer/rectifier Compressor refrigerator/AES refrigerator 20 A yellow EBL 99 Heater 10 A red Basic light/entrance step electrical 25 A white Reserve 4 – Reserve 3 – Reserve 2 –...

  • Page 77: Appliances

    Appliances 10.1 General 10Appliances The heat exchanger of the Truma hot-air heater has to be replaced after 30 years. Only the manufacturer of the heater or an authorised specialist workshop is allowed to replace the heat exchanger. The operator of the heater must see to it that the parts are replaced.

  • Page 78: To Heat Properly

    Appliances 10.2.1 To heat properly Fig. 81 Air outlet nozzle Hot air distribution Several air outlet nozzles (Fig. 81) are built into the vehicle. Pipes conduct the warm air to the air outlet nozzles. Turn the air outlet nozzles in a suitable posi- tion so the air can escape as required.
  • Page 79 Appliances Selecting operating mode: Set the operating mode using the rotary switch (Fig. 82,3). The power supply of the heater cannot be interrupted by means of the 12 V main switch. Winter operation The heater selects the required burner setting according to the set heating level.
  • Page 80 Appliances Variant: Heater with gas and 230 V electrical operation 230 V electrical operation is only possible when the vehicle is connected to the 230 V power supply. Select the output level for 230 V electrical operation so that it corresponds to the fuse protection of the 230 V connection (900 W for 3.9 A fuse, 1800 W for 7.8 A fuse).

  • Page 81: Heater For Waste Water Tank And Waste Water Pipes (Winter Comfort Package)

    Appliances 10.2.3 Heater for waste water tank and waste water pipes (winter comfort package) In order to prevent waste water fittings freezing up, the waste water tank and the waste water pipes can be electrically heated separately. When the heater is turned on, temperature sensors monitor the temperature of the waste water tank and the waste water pipes.

  • Page 82: Truma Combi Boiler

    Appliances 10.3.1 Truma Combi boiler 1 Summer operation water tempera- ture 40 °C or 60 °C Combi 2 Rotary switch 3 Winter operation "Heater and boiler" 4 Indicator lamp yellow/red: Lights up yellow = "Boiler heating-up phase" Flashes/lights up red = "Fault" Fig.
  • Page 83 Appliances Fig. 87 Safety/drainage valve of the boiler Winter operation In the "Heater and boiler" switch setting in winter operation, the boiler is already switched on. Summer operation In summer operation the water can be heated to 40 °C or 60 °C. Switching on: Open the regulator tap on the gas bottle and the gas isolator tap "Heater/ boiler".

  • Page 84: Gas Cooker

    Appliances 10.4 Gas cooker Never let gas escape unburned due to danger of explosion. Before using the cooker make sure that there is sufficient ventilation. Open windows or the skylight. Do not use gas cooker or gas oven for heating. Always protect your hands with cooking gloves or potholders when han- dling hot pots, pans and similar items.

  • Page 85: Refrigerator

    Appliances The vehicle kitchen unit is fitted with a two-burner gas cooker. Fig. 88 Operating controls for gas cooker Switching on: Open the regulator tap on the gas bottle and the gas isolator tap "Cooker". Open the gas cooker lid. Turn the control knob (Fig.

  • Page 86: Refrigerator Ventilation Grill

    Appliances 10.5.1 Refrigerator ventilation grill Fig. 89 Refrigerator ventilation grill Removal: Press the latch (Fig. 89,1). Remove the refrigerator ventilation grill. 10.5.2 Operation (Dometic 4 series) Operating modes The refrigerator has 2 operating modes: Gas operation Electrical operation (230 VAC or 12 VDC) The operating mode is set with the operating controls on the refrigerator panel.
  • Page 87 Appliances Switching on: Open the regulator tap on the gas bottle and the gas isolator tap "Refriger- ator". Set 12 V switch " " (Fig. 90,1) to " ". Set 230 V switch " " (Fig. 90,2) to " ". Turn the control knob (Fig.

  • Page 88: Operation (Waeco)

    Appliances 10.5.3 Operation (Waeco) Operating modes The refrigerator is only operated with 12 V or 24 VDC. 1 Temperature controller 2 Green LED: Operation 3 Red LED: Fault Fig. 91 Operating controls in the refrig- erator Switching on: Turn the temperature controller (Fig. 91,1) from position "0" to "1". The appliance is switched on, the interior lighting is on.

  • Page 89: Refrigerator Door Locking Mechanism

    Appliances 10.5.4 Refrigerator door locking mechanism During the journey the refrigerator door must always be closed and be locked in the closed position. When the refrigerator is switched off, bring the refrigerator door into the ventilation position and lock it in place if possible. This prevents mould from forming.
  • Page 90 Appliances Waeco Fig. 93 Refrigerator door locking mechanism Opening: Turn the locking mechanism (Fig. 93,1) anticlockwise. Open the refrigerator door. Closing: Fully close the refrigerator door. Turn the locking mechanism (Fig. 93,1) clockwise. Locking in the ventilation Slightly open refrigerator door. position: Turn the locking mechanism (Fig.

  • Page 91: Sanitary Fittings

    Sanitary fittings 11.1 Water supply, general 11Sanitary fittings Fill the water tank with fresh water only. Water left standing in the water tank or in the water pipes becomes undrinkable after a short period. For this reason, rinse the water pipes and the water tank thoroughly with several litres of fresh water before each use of the vehicle.

  • Page 92: 20 L Maximum Filling

    Sanitary fittings Fill the water tank with fresh water. Use a water hose, a water canister with a funnel or similar for filling. Close the fresh water filler neck. Screw the cap back onto the water tank. Draining water: Unscrew the cap (Fig. 94,2) on the water tank. Remove the stopper (Fig.
  • Page 93 Sanitary fittings Fig. 96 Operation of the waste water The square bolt for opening the waste water tap is directly accessible under the vehicle floor. Emptying: Place the key onto the square bolt (Fig. 96,1). In order to open the waste water tap, turn the square bolt a quarter turn. Completely empty waste water tank.

  • Page 94: Water System

    Sanitary fittings 11.4 Water system When filling the water tank, observe the maximum permissible gross weight of the vehicle. The water pump will overheat without water and can get damaged. Never operate water pump when the water tank is empty. If the vehicle is not used for several days or if it is not heated when there is a risk of frost, empty the entire water system.

  • Page 95: Toilet Compartment

    Sanitary fittings Empty the waste water tank. Take note of the environmental tips in this chapter. Empty Thetford cassette. Take note of the environmental tips in this chapter. Rinse the water tank thoroughly. Let the water system dry for as long as possible. After emptying, leave all water taps on in the central position.

  • Page 96: Vario Toilet Compartment

    Sanitary fittings 11.6 Vario toilet compartment Depending on the model, the vehicle is fitted with a Vario toilet compartment. The toilet compartment can be changed in just a few steps so that an enclosed cubicle is available for showering. 11.6.1 Converting into a shower cubicle Fig.
  • Page 97 Sanitary fittings Fig. 100 Thetford toilet bowl, swiveling Fig. 101 Flush button/indicator lamp Thetford toilet Flushing: Before flushing open the sliding trap of the Thetford toilet. To do this, push the slide lever (Fig. 100,1) anticlockwise. For flushing, press the blue flush button (Fig. 101,1). After flushing close the sliding trap.
  • Page 98 Sanitary fittings Motorhome - 02/11-0 - PSL-MJ11-00EN...

  • Page 99: Care

    Care 12.1 External care 12Care 12.1.1 Washing with a high-pressure cleaner Do not clean the tyres with a high-pressure cleaner. The tyres might be damaged. Do not spray external applications (deco-films) directly with the high-pres- sure cleaner. The external applications could come off. Before cleaning the vehicle with a high-pressure cleaner, observe the oper- ating instructions of the high-pressure cleaner.

  • Page 100: Windows Of Acrylic Glass

    Care 12.1.3 Windows of acrylic glass Acrylic glass windows are delicate and require very careful handling. Never rub acrylic glass windows when dry as dust particles might damage the surface. Only clean acrylic glass windows with plenty of warm water, dish washing liquid and a soft cloth.

  • Page 101: Winter Care

    Care Do not use vinegar based products to clean the toilet and water system, or for decalcification of the water system. Vinegar-based products may cause damage to seals or parts of the installation. Use standard decalcifying products for decalcification. Save water. Mop up all remaining water. The service centres of our dealers will be glad to provide information about the use of maintenance products.

  • Page 102: Winter Operation

    Care 12.3.1 Winter operation During winter operation, condensation develops when the vehicle is occupied under low-temperature conditions. To ensure good interior air quality and avoid vehicle damage from condensation, sufficient ventilation is essential. When heating the vehicle, the heater should be at the highest setting and roof storage cabinets, curtains and blinds should be opened.

  • Page 103: Winter Lay-Up

    Care Activities Done Gas system Close regulator tap on the gas bottle Close all gas isolator taps Always remove gas bottles from the gas bottle compartment, even if they are empty Electrical system Fully charge living area and starter battery Charge the battery for at least 20 hours before laying up.

  • Page 104: Starting Up The Vehicle After A Temporary Lay-Up Or After Lay-Up Over Winter

    Care Activities Done Water system Clean the water system using a cleaning agent from a specialised store Complete vehicle Arrange the tarpaulins in such a way that the ventilation openings are not covered, or use porous tarpaulins 12.4.3 Starting up the vehicle after a temporary lay-up or after lay- up over winter Go through the following checklist before start-up: Activities...

  • Page 105: Maintenance

    Maintenance 13.1 Official inspections 13Maintenance An official general inspection (HU) of roadworthiness has to be carried out by a recognised body (such as "TÜV", "DEKRA") at regular intervals in accord- ance with Section 29 of the German Traffic Licencing Regulations ("Straßen- verkehrszulassungsordnung"...

  • Page 106: Ceiling Lamp

    Maintenance New bulbs should not be touched with the fingers. Use a cloth when inserting the new bulb. Only use bulbs of the same type and with the correct wattage. 13.4.1 Ceiling lamp Fig. 104 Ceiling lamp Changing bulbs: Use a suitable tool (e.g. a screwdriver) to carefully lever out the cover (Fig.

  • Page 107: Halogen Spotlight (With Glass Shade)

    Maintenance 13.4.3 Halogen spotlight (with glass shade) Fig. 106 Halogen spotlight (with glass shade) Changing bulbs: Pull the halogen bulb (Fig. 106,1) forward out of the socket. Press the new halogen bulb into the fitting between the two spring tongues. 13.4.4 Halogen spotlight (movable) Fig.

  • Page 108: Surface-Mounted Halogen Light (Swiveling)

    Maintenance 13.4.5 Surface-mounted halogen light (swiveling) Fig. 108 Surface-mounted halogen light (swiveling) Changing bulbs: Use a suitable tool (e.g. a screwdriver) to lever out and remove the cover (Fig. 108,1). Remove halogen bulb. Put in a new halogen bulb. Reassemble the lamp in the reverse order. 13.5 Replacing the battery at the lamp in the pop-up roof Fig.

  • Page 109: Spare Parts

    Maintenance 13.6 Spare parts Every alteration of the original condition of the vehicle can alter road behaviour and jeopardize road safety. The special equipment and original spare parts recommended by PÖSSL have been specially developed and supplied for your vehicle. Your PÖSSL dealer has these products.

  • Page 110: Warning And Information Stickers

    Maintenance 13.8 Warning and information stickers There are warning and information stickers on and inside the vehicle. Warning and information stickers are for the sake of safety and must not be removed. Replacement stickers can be obtained from an authorised dealer or the service centre.

  • Page 111: Troubleshooting

    Troubleshooting 14.1 Electrical system 14Troubleshooting When the living area battery is changed, only use batteries of the same type. See Chapter 9 for changing the fuses. Fault Cause Remedy Interior lighting does not Bulb is defective Unscrew cover of the rel- work evant light, replace bulb.

  • Page 112: Gas System

    Troubleshooting Fault Cause Remedy 12 V power supply does 12 V power supply Switch 12 V power sup- not work in 230 V opera- switched off ply on tion Battery cut-off switch on Set battery cut-off switch the transformer/rectifier is to on switched off Charger module in the...

  • Page 113: Cooker

    Troubleshooting 14.3 Cooker Fault Cause Remedy Ignition fuse does not op- Heat-up time is too short Keep control knob erate (flame does not pressed for approx. 15 to burn after the control 20 seconds after ignition knobs are released) Ignition fuse is defective Contact customer service Flame extinguishes when Thermocouple sensor is...

  • Page 114: Refrigerator

    Troubleshooting Fault Cause Remedy Boiler empties, safety/ Temperature at the drain- Switch on the heater. At drainage valve has age valve below approx. temperatures below ap- opened 3 °C prox. 3 °C the drainage valve opens automatical- Battery cut-off switch or Switch battery cut-off main switch on the trans- switch or main switch on...

  • Page 115: Waeco Refrigerator

    Troubleshooting Fault Cause Remedy Refrigerator does not Jumbo flat fuse (40 A) on Replace jumbo flat fuse switch on when operating the starter battery is de- (40 A) on the starter bat- in 12 V mode fective tery Flat fuse (2 A) in the Replace flat fuse (2 A) in starter battery is defec- the starter battery...

  • Page 116: Water Supply

    Troubleshooting 14.6 Water supply Fault Cause Remedy Leakage water inside the A leak has occurred Identify leak, re-connect vehicle water pipes No water Water tank is empty Top up with fresh water Drain cock not closed Close drain cock 12 V power supply Switch 12 V power sup- switched off ply on...

  • Page 117: Technical Data

    Technical data 15.1 Weights 15Technical data Every alteration of the original condition of the vehicle can alter road behaviour and jeopardize road safety. Accessories that have been retrofitted increase the mass in ready-to- drive condition, while the payload is reduced by the corresponding amount.

  • Page 118: Equipment

    Technical data 15.3 Equipment Model Living Holders Water Waste area for 2 gas pressure tank water tank battery bottles regulator (approx.) (approx.) 2 Win 95 Ah 2 x 11 kg 30 mbar 100 l 92 l 2 Win 95 Ah 2 x 11 kg 30 mbar 100 l...

Table of Contents