Related Manuals for Possl Globecar Summit
Summary of Contents for Possl Globecar Summit
- Page 1 Bedienungsanleitung Instruction Manual | Istruzioni per I‘uso | Mode d‘emploi Instrucciones de uso | Gebruiksaanwijzing | Instruktionbok | Käyttöohje Bruksanvisning | Betjeningsvejledningen...
- Page 3 Instruction manual Congratulations Instruction manual We congratulate you on your new motorhome and would like to thank you for choosing a quality product from our company. Whatever journey you want to take - with a Summit, Summit Prime and Summit Shine motorhome you always have the right companion for every trip: Whether for a city trip, a short excursion or your family holidays.
- Page 4 Instruction manual Motorcaravan - 09/21-0 - GLO-MJ22-00EN...
-
Page 5: Table Of Contents
Table of Contents Records 7.1.2 Cap for the fresh water filler neck ..29 ..... . . 5 Ventilation . - Page 6 Table of Contents 10.2.3 Panel Truma CP plus (optional)..67 14.5.1 Refrigerator .....98 10.3 Boiler ......72 14.5.2 Refrigerator error codes .
-
Page 7: Records
Records Vehicle document 1Records Vehicle data Model: Car manufacturer/type of engine: Serial number: Initial registration: Purchased from company: Key number: Chassis number: Customer address Surname, Christian name: Street, no.: Postal code, town: E-mail: Dealer's stamp and signature We reserve the right to alter the construction, equipment and the scope of deli- very. -
Page 8: Inspection Records
Records Inspection records Delivery Date: H-Line Produktion Signature and stamp of the GmbH dealer: 1th year Date: H-Line Produktion Signature and stamp of the GmbH dealer: No defects found Found defects: Should it be determined during an inspection that additional work is necessary, then the carrying out of this work is dependent on the customer commissioning this to be done. -
Page 9: Inspection Plan
Records Inspection plan Pos. Component Activity Interval Joints, hinges Lubricate Annually Refrigerator, heater, boiler, Function check Annually cooker, lighting, storage flap and door closures, toilet, seat belts Windows, skylights Function check, water Annually ingress test Upholstery, curtains, blinds Visual check Annually Sealing strips, edges, -rubber Check for damage... -
Page 10: Introduction
Introduction Please read this instruction manual completely before 2Introduction using the vehicle for the first time! Always keep this instruction manual in the vehicle. Also inform all other users of the safety regulations. The non-observance of this symbol can lead to personal injury. ... -
Page 11: General
Introduction General The vehicle is constructed in accordance with the latest technology and the recognised safety regulations. Nevertheless, personal injury may result and the vehicle may be damaged if the safety instructions in this instruction manual are not followed. Depending on the configuration, the first-aid kit and hazard warning triangle are not included as standard. - Page 12 Introduction When parked, do not allow the engine to run more than necessary. When running idle, a cold engine releases more contaminants than usual. The running temperature of the engine is achieved more quickly whilst the vehicle is in motion. Use an environmentally-friendly WC chemical agent for the WC which can ...
-
Page 13: Safety
Safety Fire prevention 3Safety 3.1.1 Avoidance of fire risks Never leave children in the vehicle unattended. Keep flammable materials clear of heating and cooking appliances. Lights can get very hot. When the light is switched on, a safety distance ... -
Page 14: General
Safety General The oxygen in the vehicle interior is used up by breathing and the use of gas operated appliances. That is why the oxygen needs to be replaced on a constant basis. For this purpose, forced ventilation options (e.g. skylights with forced ventilation, mushroom-shaped vents or floor vents) are fitted to the vehicle. -
Page 15: Road Safety
Safety Road safety Before commencing the journey, carry out a functional check of indica- ting and lighting equipment, the steering and the brakes. If the vehicle has been stationary for a long period (approx. 10 months) have the braking and gas systems checked by an authorised specialist workshop. -
Page 16: Towing
Safety Towing Care is to be taken when connecting and detaching a trailer. Risk of acci- dent and injury! No persons are to be between the towing vehicle and the trailer during positioning for connecting and detaching. Gas system 3.5.1 General information Close all gas isolator taps and the regulator tap before commencing the... - Page 17 Safety When gas appliances are switched on where the operating knob has to be pressed in for ignition (e.g. gas cooker), this has to spring back by itself when it is released. Propane gas is capable of gasification up to -42 °C, whereas butane gas ...
-
Page 18: Gas Bottles
Safety 3.5.2 Gas bottles Gas bottles are only to be transported within the designated gas bottle compartment. Place gas bottles vertically in the gas bottle compartment. Tie down gas bottles so that they are unable to turn or tilt. ... -
Page 19: Water System
Safety Water system Water left standing in the water tank or in the water pipes becomes undrinkable after a short period. For this reason, rinse the water pipes and the water tank thoroughly with several litres of fresh water before each use of the vehicle. -
Page 20: Before The Journey
Before the journey Payload 4Before the journey Excessive payload and the wrong tyre pressure can cause the tyre to burst. You can lose control of the vehicle. Adapt your speed to the payload. The stopping distance is longer when ... -
Page 21: Calculating The Payload
Before the journey Additional equipment Additional equipment includes accessories and special equipment. Examples of additional equipment include: Tow coupling Roof racks Awning Bike or motorcycle rack Satellite unit Information about the weights of the various special equipment devices can be obtained from the manufacturer. -
Page 22: Loading The Vehicle Correctly
Before the journey mass in kg to be Calculation calculated Example for calculating the Maximum permissible gross weight ac- 3300 payload cording to vehicle documents, Field F.1 Vehicle mass in a ready-to-drive condi- - 2720 tion, including basic equipment according to Certificate of Conformity (CoC) Point 13.2, actual weight This results in a permissible payload... -
Page 23: Entrance Step
Before the journey Entrance step Before starting the journey and also after short breaks check whether the entrance step has been retracted completely. Do not stand in the direct range of movement of the entrance step while the entrance step is being extended or retracted. Do not step on the entrance step until it has extended completely. -
Page 24: Road Safety
Before the journey Road safety Check the tyre pressure before a journey and at 2-week intervals. Wrong tyre pressure causes excessive wear and can lead to damage or even to tyre burst. You can lose control of the vehicle. Before commencing the journey, work through the checklist: Checks checked... -
Page 25: Spare Key
Before the journey Checks checked Table and sink cover securely stored (e.g. rear storage com- partment) Water tank filled sufficiently All the water tapping points as well as kitchen, bath, shower, and toilet checked for leakage Gas system Gas bottles firmly fixed in the gas bottle compartment so that they are unable to turn Protective cap set on top of the gas bottle Regulator tap on the gas bottle and gas isolator taps are... -
Page 26: During The Journey
During the journey Driving the motorhome 5During the journey The base vehicle is a commercial vehicle (small truck). Adapt your manner of driving correspondingly. Before starting the journey and also after short breaks check whether the entrance step has been retracted completely. Always wear a seat belt during the journey at those seats where a seat ... -
Page 27: Seat Belts
During the journey Seat belts The vehicle is equipped with automatic three-point safety belts at those seats in the living area for which a seat belt is stipulated by law. The corresponding national regulations apply for using a seat belt. Before starting the journey fasten your seat belt and keep it fastened ... -
Page 28: Seating Arrangement
During the journey Seating arrangement During the journey, persons are only to sit on the permitted seats. The authorised number of seats is stipulated in the vehicle documents. Sitting on the divans is forbidden during the journey. Wearing of seat belts is compulsory at all seats. ... -
Page 29: Pitching The Motorhome
Pitching the motorhome Handbrake 6Pitching the motorhome Firmly apply the handbrake when parking the vehicle. An applied handbrake can prevent the driver's seat from turning. If neces- sary release the handbrake briefly. Entrance step In order to exit the vehicle, first fully extend the entrance step. 230 V connection The vehicle can be connected to a 230 V power supply (see Chapter 9). -
Page 30: Living
Living External flaps 7Living Before commencing the journey, close all external flaps and lock them. When leaving the vehicle, close all external flaps. The external flaps fitted to the vehicle are all fitted with identical locking cylin- ders. Therefore, all locks can be opened with a single key. 7.1.1 Flap for 230 V connection, square Fig. -
Page 31: Cap For The Fresh Water Filler Neck
Living 7.1.2 Cap for the fresh water filler neck Fig. 5 Cap for the fresh water filler Fig. 6 Cap for the fresh water filler neck (Variant 1) neck (Variant 2) The fresh water filler neck is identified by the symbol " "... -
Page 32: Windows
Living Windows The windows are partially fitted with a blind and a roller insect screen. If the blind is completely closed, exposure to direct sunlight can cause heat to accumulate between the blind and the glass window. The window could be damaged. -
Page 33: Windows Living Area
Living 7.3.1 Windows living area Fig. 7 Window and blind Securing knob Closing yoke Catch lever Opening: Press in the respective securing knob of the catch lever and turn the latch by 90°. Open the window to the desired position. Ensure that the window does not ... -
Page 34: Hinged Window With Automatic Hinges
Living 7.3.2 Hinged window with automatic hinges Open the window completely in order to unblock the locking device. If the locking device is not unblocked and the window is closed nevertheless, there is the danger of the window being torn due to the massive counter- pressure. -
Page 35: Hinged Window With Damping
Living 7.3.3 Hinged window with damping When opening the hinged windows, ensure that there are no torsional forces. Open and close the hinged windows evenly. Fig. 10 Catch lever in "closed" position Fig. 11 Hinged window with damping, opened Opening: Turn the catch lever (Fig. -
Page 36: Blind And Roller Insect Screen
Living 7.3.4 Blind and roller insect screen The windows are fitted with a blind and a roller insect screen. The blind and insect screen can be adjusted separately. Fig. 12 Hinged window Blind Closing: Grip into the notch (Fig. 12,2) and pull the blind from the top downwards as ... -
Page 37: Roman Shade Windscreen
Living 7.3.6 Roman shade windscreen Fig. 15 Handle Roman shade for wind- screen Closing: Grip the Roman shades at both sides of the windscreen at the handle (Fig. 15,1) and pull carefully towards the middle of the windscreen until the mag- netic catch keeps the Roman shade closed. -
Page 38: Sliding Door
Living Sliding door Ensure when closing the sliding door that no fingers or other body parts are clamped in. Ensure that there are no persons (adults and children) in the working range when the door is closed or opened. Ensure that children do not use the sliding door without supervision. -
Page 39: Obstacle Detection Function
Living Sliding door outside The door lock of the sliding door is connected with the central locking system. Opening: Pull the door handle (Fig. 16,2). The electric sliding door opens completely. Closing: Pull the door handle (Fig. 16,2). The electric sliding door closes and latches ... -
Page 40: Emergency Unlocking Mechanism Of The Electrical Sliding Door
Living 7.4.3 Emergency unlocking mechanism of the electrical sliding door If the electrical drive of the sliding door does not function for any reason (bat- tery depleted, drive defective, etc.), the sliding door can be disconnected from the electrical drive by using the emergency unlocking mechanism. The sliding door can then be opened and closed without electrical support. -
Page 41: Power Closing Aid
Living 7.4.4 Power closing aid Fig. 19 Power closing aid (external) Fig. 20 Power closing aid - closing bar on inside The vehicle is equipped with an electro-mechanical power closing aid for the sliding door. The sliding door can be closed with only a little effort thanks to the power closing aid. -
Page 42: Insect Screen At The Sliding Door
Living Particular point Remedy Rapid opening and renewed If the door is opened and is to be closed immedi- closing of the door ately again, a waiting period of 3 seconds has to be observed. Locking the vehicle with a cen- Wait until the locking cycle of the power closing tral locking system aid is complete and then close the vehicle using... -
Page 43: Skylights And Skyroof
Living ® Skylights and SkyRoof The apertures for forced ventilation must always be kept open. Never cover or block forced ventilations with objects such as e.g. a winter mat. Keep forced ventilations clear of snow and leaves. ®... -
Page 44: Hinged Skylight
Living 7.5.1 Hinged skylight If it rains, the ventilation skylight position could lead to water entering the living area. Therefore close hinged skylight completely. Fig. 22 Securing knob at the hinged Fig. 23 Hinged skylight, guide skylight The hinged skylight is opened on one side only. Opening: Press the safety knob (Fig. -
Page 45: Wind-Up Skylight And Skyroof
Living Closing: Pull out Roman shade at the handle and release in the required position. The Roman shade will stay in that position. Opening: Slowly push the Roman shade at the handle to its initial position. Insect screen To close and open the insect screen: Closing: Pull the insect screen by the handle to the opposite handle of the Roman... -
Page 46: Multiroof (Optional)
Living Multiroof (optional) Fig. 27 Multiroof (optional) Fig. 28 Multiroof folded upwards Additional storage space can be created with the foldable Multiroof (Fig. 27,1). Before conversion, check that there are no heavy objects in the tray. When locking the Multiroof with the locking bolts, take care not to scratch ... -
Page 47: Locking Mechanism Of The Cupboard
Living Locking mechanism of the cupboard doors Opening doors: Press in the push button and let it spring out. Pull open the door. Closing doors: Close the door. Press in the push button to lock. Table (optional) Fig. -
Page 48: Lamps
Living 7.11 Lamps Lamps and light fittings can develop heat. Let the lamps and light fittings cool down before touching them. When the light is switched on or is still hot, a safety distance of at least 30 cm to combustible material such as net curtains or curtains has to be maintained. -
Page 49: Beds
Living 7.12 Beds 7.12.1 Bed in the pop-up roof The maximum load for the bed in the pop-up roof amounts to 200 kg. Fold in the pop-up roof before commencing the journey. Only use the bed in the pop-up roof if the safety guards are in position. ... -
Page 50: Additional Seat
Living Access ladder Always use the access ladder provided as standard to access the overcab bed. The access ladder is not intended to be leaned on, but may only be used when suspended. Observe the other safety instructions in the accompanying manufacturer's ... -
Page 51: Set Up Additional Seating
Living 7.13.1 Set up additional seating Fig. 38 Pulling out the seat extension Fig. 39 Hook in backrest Fig. 40 Remove the seat cushion Fig. 41 Fold out seat Fig. 42 Pulling out the seat extension Pull the seat extension (Fig. 38,1) out of the two-person seat. ... -
Page 52: Gas System
Gas system General 8Gas system Close all gas isolator taps and the regulator tap before commencing the journey and when leaving the vehicle. Closing of the isolator and regulator valves is not required at vehicles that are equipped with a crash sensor. No appliance (e.g. -
Page 53: Gas Bottles
Gas system Regularly inspect the gas tube fitted to the gas bottle connection for tightness. The gas tube must not have any tears and must not be porous. Have the gas tube replaced by an authorised specialist work- shop no later than 10 years after the manufacturing date. The operator of the gas system must see to it that the parts are replaced. -
Page 54: Changing Gas Bottles
Gas system Screwed connections on the gas pressure regulator have left-handed threads. For gas-operated units the gas pressure must be reduced to 30 mbar. Connect gas pressure regulator complete with safety valve directly to bottle valve. The gas pressure regulator reduces the gas pressure in the gas bottle down to the operating pressure of the gas devices. -
Page 55: Gas Isolator Taps
Gas system Gas isolator taps 1 Cooker 2 Heater/boiler Fig. 44 Symbols for the gas isolator taps A gas isolator tap (Fig. 44) for every gas device is built into the vehicle. The gas isolator taps are located under the rear bed on the left-hand vehicle side. -
Page 56: Electrical System
Electrical system General safety instructions 9Electrical system Only allow qualified personnel to work on the electrical system. All electronic devices (e.g. mobile telephones, radios, televisions or DVD players) which have been retrofitted to the vehicle and are operated during the journey must have specific features: These are the CE certi- fication, the EMC test (electromagnetic compatibility) and the "E1"... - Page 57 Electrical system The battery is maintenance-free. Maintenance-free means: It is not necessary to check the acid level. It is not necessary to lubricate the battery poles. It is not necessary to refill the distilled water. Even a maintenance-free battery must be charged regularly. The charging condition of the living area battery can be read off on the panel.
-
Page 58: Charging Unit
Electrical system Charging unit If possible, always leave the charging unit switched on (except in the case of maintenance work or when removing the vehicle battery). The charging unit heats up during operation. In the case of a total discharge ... -
Page 59: Fuses
Electrical system Fuses Only replace defective fuses when the cause of the defect is known and has been remedied. Only replace defective fuses when the power supply is switched off. Never bridge or repair fuses. 9.4.1 12 V fuses The appliances connected to the 12 V power supply in the living area are fused individually. -
Page 60: Automatic Circuit Breaker
Electrical system 9.4.2 230 V automatic circuit breaker The 230 Volt power supply system (external connection) is equipped with an automatic circuit breaker (Fig. 50). This serves in particular as wiring protec- tion. The fuse box is located under the driver's seat. The automatic circuit breaker is triggered at a short-circuit and at an overload in the supply network. -
Page 61: Volt Fuses For Appliances
Electrical system 9.4.3 12 Volt fuses for appliances Solely standardised plug fuses of various fuse ratings are used. These fuses are commonly used in the automotive sector. In order to replace a defective fuse it is pulled out of its holder and replaced by an identical fuse (amperage and colour). -
Page 62: Pc220 Control Panel
Electrical system PC220 control panel Further information can be obtained from the separate instruction manual. Control panel The control panel is located above the bench seat in the living area. It serves to control the electric power supply and provides an overview of the device states. -
Page 63: Control Panel Main Display
Electrical system 9.5.1 Control panel main display Fig. 53 Control panel main display Signals that the deep discharge protection is active Display 230 Volt power connection Display of battery charging through motor or external power system Display of started vehicle engine Signals charging process by solar panel (only with BCE charge regulator) Display for fresh water tank level Display for living area battery charge... -
Page 64: Pc110-He Control Panel
Electrical system PC110-HE control panel Further information can be obtained from the separate instruction manual. Control panel The control panel is located above the sliding door in the living area. It serves to control the electric power supply and provides an overview of the device states. -
Page 65: Appliances
Appliances 10.1 General 10Appliances The heat exchanger of the Truma hot-air heater has to be replaced after 30. Only the manufacturer of the heater or an authorised specialist work- shop is allowed to replace the heat exchanger. The operator of the heater must see to it that the parts are replaced. -
Page 66: To Heat Properly
Appliances 10.2.1 To heat properly Fig. 55 Air outlet nozzle Hot air distribution Several air outlet nozzles (Fig. 55) are built into the vehicle. Pipes conduct the warm air to the air outlet nozzles. Turn the air outlet nozzles in a suitable posi- tion so the air can escape as required. - Page 67 Appliances Operating modes The heater has two operating modes: Winter operation Summer operation It is only possible to heat the vehicle in the "Winter" operating mode. With the "Summer" operating mode only water in the boiler is heated. It is not possible to heat the vehicle in this operating mode.
- Page 68 Appliances 1 230 V electrical operation (1800 W) 2 230 V electrical operation (900 W) 3 Gas operation 4 Gas operation and 230 V electrical operation (900 W) 5 Gas operation and 230 V electrical operation (1800 W) 6 Yellow indicator lamp "230 V elec- trical operation"...
-
Page 69: Panel Truma Cp Plus (Optional)
Appliances 10.2.3 Panel Truma CP plus (optional) The control panel Truma CP plus serves to control and monitor the tempera- ture (room/water temperature) and to set the air-conditioning system. Further information can be obtained in the separate manufacturer's instruc- tion manual. - Page 70 Appliances Menu Description Set the timer. Switch lighting on and off. Brightness can be selected in 5 levels. Set the time. Call up the service menu. Switching on and off Switching on: Tap the rotary/push button (Fig. 58,8). Previously set values/operating parameters become again after switching Switching off: Press the rotary/push button (Fig.
- Page 71 Appliances Changing the hot water level 1 OFF - Hot water processing OFF 2 Boiler* - Hot water processing ON 3 eco** - Hot water temperature 40 °C 4 hot - Hot water temperature 60 °C 5 boost* - Rapid heating of the boiler contents * Symbol flashes until the desired water temperature has been reached.
- Page 72 Appliances Selecting the fan level 1 OFF - Fan OFF (no appliance being operated) 2 VENT - Circulating air (no appliance being operated and hot water proces- sing OFF) 3 ECO - Low fan level 4 HIGH* - High fan level 5 BOOST - Rapid room heating (if diffe- rence between selected and actual room temperature >10 °C)
- Page 73 Appliances Deactivating the timer: Use the rotary/push button (Fig. 58,8) to deactivate the timer (OFF). Tap the rotary/push button (Fig. 58,8) to confirm the value. Switching the lighting on and off Switching the lighting on: Use the rotary/push button (Fig. 58,8) to select the lighting symbol and tap ...
-
Page 74: Boiler
Appliances 10.3 Boiler Never let gas escape unburned due to danger of explosion. When filling the fuel tank, on ferries or in the garage, never run the boiler in gas operation. Danger of explosion! Never operate the boiler in gas operation in closed rooms (e.g. garages). ... - Page 75 Appliances Safety/drainage valve The boiler is equipped with a safety/drainage valve (Fig. 65). The safety/drai- nage valve prevents water in the boiler from freezing, when there is frost and the heater is not switched on. The safety/drain valve is installed near the heater or in the floor storage compartments under the table.
-
Page 76: Gas Cooker
Appliances Filling/emptying the boiler The boiler can be supplied with water from the water tank. Filling the boiler with water: Switch on 12 V power supply on the panel. Close the safety/drainage valve. To do so turn the knob (Fig. 65,1) cross- ... -
Page 77: Refrigerator
Appliances Use only pots and pans whose diameter is suitable for the burner grates of the gas cooker. When the flame fades, the thermocouple automatically cuts the gas supply. Further information can be obtained from the separate instruction manual ... -
Page 78: Sanitary Fittings
Sanitary fittings 11.1 Water supply, general 11Sanitary fittings Fill the water tank with fresh water only. Water left standing in the water tank or in the water pipes becomes undrinkable after a short period. For this reason, rinse the water pipes and the water tank thoroughly with several litres of fresh water before each use of the vehicle. - Page 79 Sanitary fittings Fresh water tank The fresh water tank is located in the left-hand or right-hand rear area under the bed. Opening the fresh water Remove the mattress. tank: Open the flap to the tank area. Emptying the fresh water Ensure that the water pump is switched off.
-
Page 80: Emptying The Waste Water Tank
Sanitary fittings 11.2.2 Emptying the waste water tank Never pour sewage into the waste water tank. The hose adapter for the drain nozzle with bayonet lock and the waste water hose (Ø 40 mm) are available in camping accessories trade. Clean the tank regularly since solids can accumulate in the waste water ... -
Page 81: Filling The Fresh Water Tank
Sanitary fittings 11.2.4 Filling the fresh water tank Do not fill the fresh water tank until it flows over. When filling the water tank, observe the maximum permissible gross weight of the vehicle. The water pump will overheat without water and can get damaged. Never ... -
Page 82: Starting Up The Water Supply
Sanitary fittings 11.3 Starting up the water supply Starting up the water Switch on the control panel with main button. supply: Switch on the water pump at the control panel. The indicator light indicates the operation. When the water tap is opened in the "warm" position (red point at the water ... -
Page 83: Cassette Toilet
Sanitary fittings 11.5 Cassette toilet Further information can be obtained from the separate instruction manual. 11.5.1 Commissioning the cassette toilet Never add sanitary fluid through the sliding cover or through the toilet bowl. Do not use any force when pushing the sewage tank in. This can result in ... -
Page 84: Using The Toilet In Winter
Sanitary fittings Remove the lid of the outlet neck. Grasp the sewage tank at the upper handle that is located next to the outlet neck. Grasp the rear handle with the other hand in such a manner that the aeration knob can be pressed with the thumb during emptying. -
Page 85: Bathroom Unit / Toilet Usage
Sanitary fittings 11.6 Bathroom unit / toilet usage Ensure for driving that the swing wall is fastened and secured (latches in audibly) in the right-hand position (Fig. 73) at the magnetic holder. While travelling ensure that the door of the bathroom unit is open and is secured by means of the supplied bracket. -
Page 86: Care
Care 12.1 External care 12Care 12.1.1 Washing with a high-pressure cleaner Do not clean the tyres with a high-pressure cleaner. The tyres might be damaged. Do not spray external applications (deco-films) directly with the high-pres- sure cleaner. The external applications could come off. Before cleaning the vehicle with a high-pressure cleaner, observe the opera- ting instructions of the high-pressure cleaner. -
Page 87: Windows Of Acrylic Glass
Care 12.1.3 Windows of acrylic glass Acrylic glass windows are delicate and require very careful handling. Never rub acrylic glass windows when dry as dust particles might damage the surface. Only clean acrylic glass windows with plenty of warm water, dish washing ... -
Page 88: Cleaning And Care Of The External Syn
Care 12.1.7 Cleaning and care of the external synthetic parts The following substances may not come into contact with synthetic surfaces: Stain remover Benzene Acetone Nail polish remover Iodine tincture 12.2 Interior care If possible, treat stains immediately. ... -
Page 89: Winter Care
Care Brush Roman shades with a soft brush or vacuum with the brush attach- ment of the vacuum cleaner. Grease or stubborn dirt may be removed with a mild soap at 30 °C (curd soap). Unrolled seat belts can be cleaned with warm soapsuds. The seat belts ... -
Page 90: Lay-Up
Care 12.4 Lay-up 12.4.1 Temporary lay-up After the vehicle has been standing for a longer period (approx. 10 months) have the braking and gas systems checked by an authorised specialist workshop. Take into consideration that water is undrinkable after only a short time. ... -
Page 91: Winter Lay-Up
Care When returning the motorhome to service check whether the filled water system leaks. This is also advisable before starting every journey and should be repeated at regular intervals. Damage that is caused by improper handling or by frost in the water ... -
Page 92: Starting Up The Vehicle After A Temporary Lay-Up Or After Lay-Up Over Winter
Care 12.4.3 Starting up the vehicle after a temporary lay-up or after lay- up over winter Go through the following checklist before start-up: Activities done Base vehicle Check the tyre pressure on all tyres Check the tyre pressure of the spare wheel Body Clean dust and dirt from the entrance step Check that the doors, windows and skylights are working properly... -
Page 93: Maintenance
Maintenance 13.1 Official inspections 13Maintenance An official general inspection (HU) of roadworthiness has to be carried out by a recognised body (such as "TÜV", "DEKRA") at regular intervals in accordance with Section 29 of the German Traffic Licencing Regulations ("Straßenverkehrszulassungsordnung" (StVZO)) on vehicles that are regis- tered in Germany. -
Page 94: Replacing Lamps
Maintenance 13.4 Replacing lamps Bulbs and light fittings can be extremely hot. Therefore, allow lights to cool down before changing bulbs. Before changing bulbs, switch off the power supply at the safety cut-out in the 230 V fuse box. Store bulbs in a safe place inaccessible to children. -
Page 95: Vehicle Identification Plate
Maintenance 13.6 Vehicle identification plate EC type approval number Manufacturer of the unit (add-on unit) Chassis number Maximum permissible gross weight of the vehicle Maximum permissible gross weight of the vehicle with trailer Permissible axle load front Permissible axle load rear Vehicle identification plate (similar to type plate) The vehicle identification plate with the serial number is located on the B-... -
Page 96: Troubleshooting
Troubleshooting 14.1 Electrical system 14Troubleshooting When the living area battery is changed, only use batteries of the same type. See Chapter 9 for changing the fuses Fault Cause Remedy Interior lighting does not Bulb is defective Unscrew cover of the re- work levant light, replace bulb. -
Page 97: Gas System
Troubleshooting Fault Cause Remedy 12 V power supply does 12 V power supply swit- Switch 12 V power sup- not work in 230 V operati- ched off ply on Battery cut-off switch on Set battery cut-off switch the transformer/rectifier is to on switched off Charger module in the... -
Page 98: Cooker
Troubleshooting 14.3 Cooker Fault Cause Remedy Ignition fuse does not Heat-up time is too short Keep control knob operate (flame does not pressed for approx. 15 to burn after the control kn- 20 seconds after ignition obs are released) Ignition fuse is defective Contact customer service Flame extinguishes when Thermocouple sensor is... - Page 99 Troubleshooting Fault Cause Remedy Boiler empties, safety/ Temperature at the drai- Switch on the heater. At drainage valve has ope- nage valve below approx. temperatures below ap- 3 °C prox. 3 °C the drainage valve opens automati- cally. Battery cut-off switch or Switch battery cut-off main switch on the trans- switch or main switch on...
-
Page 100: Refrigerator
Troubleshooting 14.5 Refrigerator In the event of a defect contact the nearest customer service workshop of the relevant appliance manufacturer. The list of addresses is enclosed with the accompanying appliance documentation. Only authorised qualified personnel may repair the appliance. 14.5.1 Refrigerator Fault Cause... -
Page 101: Refrigerator Error Codes
Troubleshooting 14.5.2 Refrigerator error codes The error code LED indicates different error states via the number of light pulses. A light pulse lasts 1/4 of a second. The error code is repeated every 4 seconds. Number of light Error type Possible cause pulses Battery protective... -
Page 102: Body
Troubleshooting Fault Cause Remedy Display for water and Measuring probe in the Clean water/waste water waste water indicates a waste water or water tank tank wrong value is soiled Measuring probe is de- Replace measuring pro- fective Waste water tank cannot Drain cock is clogged Open the cleaning cap be emptied...
Need help?
Do you have a question about the Globecar Summit and is the answer not in the manual?
Questions and answers
where is the safety drainage valve on the possl trenta