Setting The Unattended Auto-Lock Feature - iStorage Datashure SSD User Manual

SSD

13. Setting the Unattended Auto-Lock Feature

To protect against unauthorised access, if the datAshur SSD is unlocked and unattended, the datAshur SSD can be set to
automatically lock after a predetermined period of inactivity. In its default state, the datAshur SSD's Unattended Auto-Lock
feature is turned off.
The Unattended Auto-Lock can be set to activate after 5, 10 or 20 minutes of inactivity.
To set the Unattended Auto-Lock, perform the following steps:
1. Enter the Admin mode. (Hold
Admin PIN and press the
2. Once in Admin mode, press
3. Press one of the numbers below that corresponds to the amount of inactivity you would like the datAshur SSD to lock
itself after:
0 = OFF (The Default is OFF for this feature.)
1 = 5 minutes
2 = 10 minutes
3 = 20 minutes
4. After you have entered the desired amount of allowable inactivity, the
command acceptance, and then will return to the Admin mode, indicated by the
#10
UNLOCK + the number 0 button for five seconds – with the
UNLOCK button.) The LED will now be solid BLUE.
UNLOCK + the number 6 button. The
www.istorage-uk.com
RED
RED and BLUE LED's will blink alternately.
GREEN LED will blink three times indicating
BLUE LED glowing solid.
LED blinking, enter the