Epson TM-C7500 Setup Manual page 21

English
15. Close the paper set cover.
16. Press the
Pause button
Test Printing (Nozzle Check Printing)
You can check whether the printer is operating normally by printing the nozzle check pattern.
Perform nozzle check printing by following the steps below. You can use nozzle check to check whether the
nozzle is clogged from the printed pattern.
1. Make sure that the printer is powered on. (U
2. Press (Menu) button to display the menu.
3. Select [NOZZLE CHECK] and press the OK button.
4. Select [YES] and press the OK button.
The nozzle check pattern is printed.
5. Check the printed nozzle check pattern.
If the pattern is printed normally, all the lines are printed properly as shown in the left figure below.
The nozzle is clogged if there is an unprinted line as shown in the right figure below. Perform head
cleaning if this occurs.
For details about head cleaning, refer to Technical Reference Guide.
<Normal>
.
)
"Turning On" on page 10
<Clogged Nozzle>
21