Lenovo IDEAPAD Y730 User Manual page 44

Lenovo IdeaPad Y730 UG V1.0_en.book Page 35 Friday, June 27, 2008 6:06 PM
Chapter 2. Using Your Computer
Changing or Removing the User Password
To change the password, do the following:
1 Select Set User Password, and press the Enter key. The Set User
Password window opens.
2 Choose your user password, which can be from two to eight
alphanumeric characters in any combination. Type correct password
in the Enter Current Password field. Then press Enter key once to
move to the Enter New Password field, type a new user password in.
3 Press the Enter key once to move to the Confirm New Password field.
Retype the password you just entered to verify it.
4 Commit your password to memory, and press the Enter key.
To remove the password, do the following:
1 Select Set User Password, and press the Enter key.
2 Type correct user password in Enter Current Password, and press
Enter key thrice.
Note:
Make sure the Password on boot is set to Enabled if you need the
password protection at power on.
35