Lenovo IDEACENTRE B3 Hardware Replacement Manual page 22

3. Spring up the handle on the hard disk drive bay, then, slide and lift the hard
disk drive bay out of the chassis as shown.
4. Remove the 4 screws that secure the hard disk drive to the disk bay
slide the defective hard disk drive out of the bay.
5. Install the new hard disk drive as follows:
(1) Slide the new hard disk drive into the drive bay.
(2) Screw the 4 screws back onto the drive bay.
6. Slide the hard disk drive bay back into position.
7. Secure the hard disk drive bay to the chassis with the remaining screw.
8. Install the computer cover back into position.
31048859 IC B3 HRG V2.0 (EN)(R).indd 17
and
Hardware Replacement Guide
2011-1-19 18:02:32
17