Using The Rescue And Recovery Workspace - Lenovo 7813 User Manual

v On a second hard disk installed in your computer
v On an externally attached USB hard disk
v On a network drive
v On recordable CDs or DVDs (a recordable CD or DVD drive is required for this
After you have backed up your hard disk, you can restore the complete contents of
the hard disk, restore selected files only, or restore only the Windows operating
system and applications.
To perform a backup operation using the Rescue and Recovery program, do the
following:
1. From the Windows desktop, open the Start menu, select All Programs, click
2. From the Rescue and Recovery main window, click Back up your hard drive
3. Follow the instructions on the screen.
To perform a restore operation using the Rescue and Recovery program, do the
following:
1. From the Windows desktop, open the Start menu, select All Programs, click
2. From the Rescue and Recovery main window, click Restore your system from
3. Follow the instructions on the screen.
For information about performing a restore operation from the Rescue and
Recovery workspace, see "Using the Rescue and Recovery workspace."

Using the Rescue and Recovery workspace

The Rescue and Recovery(R) workspace provides an environment that runs
independently of the Windows(R) operating system and is hidden from the
Windows operating system. Because the Rescue and Recovery workspace is
hidden, it is immune to most types of virus attacks and provides a safe place from
which to perform rescue and recovery operations that might not be possible in the
Windows environment. You can perform the following recovery operations from
the Rescue and Recovery workspace:
v Rescue files from your hard disk or from a backup: The Rescue and Recovery
v Restore your hard disk from a Rescue and Recovery backup: When you
v Restore your hard disk to the factory contents: The Rescue and Recovery
option)
Lenovo Care, then click Rescue and Recovery. The Rescue and Recovery
program opens.
select backup operation options.
Lenovo Care, then click Rescue and Recovery. The Rescue and Recovery
program opens.
a backup icon.
workspace enables you to locate files on your hard disk and transfer them to a
network drive or other recordable media, such as a USB hard disk drive or a
diskette. This solution is available, even if you did not back up your files or if
changes were made to the files since your last backup operation. You also can
rescue individual files from a Rescue and Recovery backup located on your local
hard disk, a USB device, or a network drive.
perform a backup operation using the Rescue and Recovery program, you can
perform restore operations from the Rescue and Recovery workspace, even if
you cannot start the Windows operating system.
workspace enables you to restore the complete contents of your hard disk to the
Chapter 8. Recovering software
35