Returning To The Default Settings - Sony DAV-F200 Operating Instructions Manual

By pressing You can
Number buttons, Select the TV channel.
-
After pressing /, you can select
the text page by entering the three
digit page number.
ANALOG Switch to analogue mode.
DIGITAL Switch to digital mode.
/ Display the information.
/
Access Text.
Colored buttons Select the options on the menu.
Display the Digital Electronic
Programme Guide (EPG).
t/
Switch the TV's input source
between the TV and other input
sources in TV mode.
After pressing /, you can hold
the current text page.
TOOLS/ Display the operation menu for the
OPTIONS current display.
MENU/HOME Display the menu of the TV.
RETURN Return to the previous channel or
layer on the menu of the TV.
MUTING Turn off the TV sound
temporarily.
C/X/x/c, Select the item on the menu.
Tip
• The function of these buttons are same as the remote
buttons of the SONY TV. For details, refer to the
operating instructions of the TV.
Returning to the Default
Settings
Returning the system
parameters, such as preset
stations, to the default
settings
A.F.D. STD D.C.S.
"/1
1
Turn off the power.
2
Press and hold "/1 on the control unit
about 5 seconds.
"MEMORY CLR" and "PUSH POWER"
appear alternately in the front panel display
about 10 seconds.
3
Press "/1.
"CLEARING" appears in the front panel
display and the default settings are returned.
After "CLEARED!" appears, the system is
turned off.
Note
• In Step 3, if you do not press [/1 or press any buttons
other than [/1 on the control unit, the system turns
on. The setting is not made.
• When you turn on the system after returning to the
default settings, wait about 20 seconds before turning
on the power by pressing [/1.
VOL
FUNCTION
DVD HOME THEATRE SYSTEM DAV-F500
87
GB