Navigation Keys Operation Instruction; Confirm Or Change The Default Ip Address - Teledelta MPR Series Quick Start Operation And Installation Manual

MPR Receiver Quick Start Guide vr1.5
MPR Receiver – Overview

Navigation Keys Operation Instruction

Use the 6 navigation keys on front panel: Up / Down / Left / Right / Menu / Ok to enter the
configuration menu.
Enter "Menu":

Press "OK" button to enter main menu.
Exit Menu/Back for parent Menu

Upon completion of configuration settings, press "OK" button until you go back
to the Parent Menu.
Enter Sub-Menu

Press OK button to enter main menu.

Select a sub-menu by pressing UP and DOWN button.

Press MENU button on the selected sub-menu.
To change a parameter

Step 1: Enter main menu by pressing OK button.

Step 2: Scroll sub-menu by pressing UP and DOWN button, and press MENU button to
change the selected sub-menu.

Step 3: To change parameter settings, press RIGHT and LEFT button to move the cursor in
which change must be made.

Press UP button and DOWN to input / select an appropriate setting, then press MENU button
to save.

Confirm or Change the Default IP Address

Note DHCP is not provided (despite the menu selection)
1. check out the IP on the LCD screen.
2. use the button on the front panel to change the IP, gateway and subnet mask The gateway
should be the same as the management PC's. The subnet mask should be the same as the
management PC's s. The IP and the server's IP should be in the same subnet section.
3. reboot the device to take effect.
4. ping the new IP to check whether the device can connect to the management PC.
mpr receiver quick start guide vr1.5.docx Page 4 of 17