Table of Contents
Advertisement
MPR Receiver Quick Start Guide vr1.5
MPR Receiver – Overview
Quick Start - Getting Started Guide
Switch on the equipment through the back power switch, the unit is powered up and start the
initialization.
After power on the LCD screen is lights up, and displays information as follows
The initialization takes about 30 seconds to complete. The input/output indicator LEDs turn red after
the first successful initialization because the signal is not locked. After configuration of the device, the
corresponding LEDs will show the correct status.
mpr receiver quick start guide vr1.5.docx
Page 3 of 17
Advertisement
Table of Contents
