The Linn Config Application - Linn AKURATE DS System Installation And Setup Manual

AKURATE DS SYSTEM
INSTALLATION AND SETUP

8 THE LINN CONFIG APPLICATION

The Linn Config application is used to configure the settings on the
Akurate DS and Akurate Kontrol.
1. Switch on the Akurate Kontrol and wait until the standby symbol is
shown on the display.
2. Switch on the Akurate DS.
3. Launch the Linn Config if you have not already done so.
4. Highlight the Akurate DS and wait until the Linn Config connects to
the unit. The 'Version' tab contains information on the Akurate DS
for use by Linn Service personnel.
26
www.l i n n.c o .uk