Linn AKURATE DS System Installation And Setup Manual page 26

AKURATE DS SYSTEM
INSTALLATION AND SETUP
7 AKURATE DS INSTALLATION (continued...)
Back panel
1
2 3
1. OFF, ON
Mains power switch
2. POWER
Mains power inlet
3. EARTH GROUND
For connecting the unit to an earthing terminal if no mains
earth is available
4. ETHERNET
For connecting the unit to the network switch
4 5 6
5. FALLBACK
Used when reprogramming the unit
6. RS232 1 - 4
Port 1 is for connecting to a Linn Akurate Kontrol, port 2 for a Linn
Akurate CD. Ports 3 and 4 are currently not in use
7. BALANCED RIGHT/LEFT
For connection to a Linn Kisto or other pre-amplifier
8. ANALOGUE AUDIO OUTPUT
For connection to a Linn Akurate Kontrol or other pre-amplifier
24
7 8
www.l i n n.c o .uk