Accessing The Nvr With Its Default Ip Address - Surveillix ESV16 Quick Installation Manual

18 ESV16 Quick Installation Guide
Access the NVR with its default IP address
The NVR comes with a pre-configured static IP "192.168.101.50".
However, it is only used when there is no DHCP server presented in
the network. The NVR will turn on its DHCP server function and act as
the DHCP server in the network. To connect to the NVR, use a PC that
is on the same network over a switch or hub, or connect the PC
directly to the NVR using a crossover CAT5 Ethernet cable.
The PC that is connected directly to the NVR (or within the same local
area network) should receive an IP from the NVR. Simply access the
NVR from your web browser with its IP address
18