Canon PowerShot G7 User Manual page 286

Add New Hardware Wizard or New Hardware Found (Windows 2000)
Wizard displays when the camera is connected to the computer with an
interface cable.
Click {Cancel] to close the window. Temporarily disconnect the camera from the
computer. Next, read Start
by
Checking This on the previous page and resolve
the problem.
Images won't download into a
TWAIN~compliant
program (Camera and
computer connected via interface cable (Windows 2000, Windows 98 SE».
Click the [Finish] button in the Camera Control Window to close it.
Cannot download images or shoot remotely. (For cameras connected to
the computer via an interface cable: only cameras supporting
Hi~Speed
USB 2.0).
The problem may be resolved by lowering the transmission speed for data by
following the procedures below.
Solution:
Hold the MENU button on the camera down and press the
~lt'V
(Print/Share)
button and FUNC.lSET button simultaneously. In the displayed screen, select [8]
and press the FUNC.lSET button.
C;;)O
Camera not detected, Events dialog won't display or images will not
T/ download to the computer (when camera is connected to the computer
via an interface cable).
Cause 1:
There is a problem with one of the items in the
Start by Checking This
section (p. 76).
Solution:
Resolve the problem.
Cause 2:
The USB driver is not installed (Windows only).
Solution:
Install it with the procedures in Installing the Software and USB Driver (p. 10).
Cause 3:
The USB driver is not correctly installed (Windows only).
Solution:
Uninstall the driver (p. 73) before reinstalling it with the procedures in Installing
the Software and USB Driver (p. 11).